Sony MEX-N5050BT User Manual Page 2
- Page / 2
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
-B To attach
Engage part of the front panel with part of the
unit, as illustrated, and push the left side into
position until it clicks.
Warning if your car’s ignition
has no ACC position
Be sure to set the Auto Off function. For details, see
the supplied Operating Instructions.
The unit will shut off completely and automatically
in the set time after the unit is turned off, which
prevents battery drain.
If you do not set the Auto Off function, press and
hold OFF until the display disappears each time you
turn the ignition off.
Fuse replacement ( )
When replacing the fuse, be sure to use one
matching the amperage rating stated on the original
fuse. If the fuse blows, check the power connection
and replace the fuse. If the fuse blows again after
replacement, there may be an internal malfunction.
In such a case, consult your nearest Sony dealer.
Installing the microphone ( )
To capture your voice during handsfree calling, you
need to install the microphone .
Cautions
Keep the microphone away from extremely high
temperatures and humidity.
Mounting example ( )
Installation in the dashboard
Notes
Before installing, make sure that the catches on both sides of the
bracket are bent inwards 2 mm (
3
/32 in). If the catches are
straight or bent outwards, the unit will not be installed securely
and may spring out (-1).
Bend these claws outward for a tight fit, if necessary (-2).
Make sure that the 4 catches on the protection collar are
properly engaged in the slots of the unit (-3).
Mounting the unit in a Japanese
car ( )
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
Note
To prevent malfunction, install only with the supplied screws .
How to detach and attach the
front panel ( )
Before installing the unit, detach the front panel.
-A To detach
Before detaching the front panel, be sure to press
and hold OFF. Press the front panel release button,
and pull it off towards you.
It is extremely dangerous if the cord becomes
wound around the steering column or gearstick.
Be sure to keep it and other parts from obstructing
your driving.
If airbags or any other shock-absorbing equipment
is in your car, contact the store where you
purchased this unit, or the car dealer, before
installation.
-A Installing on the sun visor
Install clips (not supplied) and adjust the length and
position of the cord so that it does not obstruct your
driving.
-B Installing on the dashboard
Install a clip (not supplied) and adjust the length and
position of the cord so that it does not obstruct your
driving.
Notes
Before attaching the double-sided tape
, clean
the surface of the dashboard with a dry cloth.
Adjust the microphone angle to the proper
position.
Notes on the tuning step
For how to set the tuning step, see the supplied
Operating Instructions.
If replacing the car battery or changing the
connections, the tuning step setting will be erased.
Precautions
Choose the installation location carefully so that
the unit will not interfere with normal driving
operations.
Avoid installing the unit in areas subject to dust,
dirt, excessive vibration, or high temperatures,
such as in direct sunlight or near heater ducts.
Use only the supplied mounting hardware for a
safe and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Removing the protection collar
and the bracket ( )
Before installing the unit, remove the protection
collar and the bracket from the unit.
1 Remove the protection collar .
Pinch both edges of the protection collar , then
pull it out.
2 Remove the bracket .
Insert both release keys together between
the unit and the bracket until they click.
Pull down the bracket , then pull up the unit
to separate.
A TOYOTA
Bracket
Bracket
to dashboard/center console
Existing parts supplied with your car
size
5 × max. 8 mm
(
7
/32 × max.
5
/16 in)
size
5 × max. 8 mm
(
7
/32 × max.
5
/16 in)
B
B
B
NISSAN
Bracket
Bracket
to dashboard/center console
Existing parts supplied with your car
size
5 × max. 8 mm
(
7
/32 × max.
5
/16 in)
size
5 × max. 8 mm
(
7
/32 × max.
5
/16 in)
1
1
2
2
Face the hook inwards.
3
Dashboard Fire wall
Claws
Catch
182 mm (7
1
/4 in)
53 mm (2
1
/8 in)
Fuse (10 A)
A
A
OFF
Front panel release button
Clips (not supplied)
Clip (not supplied)
1
2
Related products and manuals for Motorcycle Accessories Sony MEX-N5050BT
(2 pages)
(2 pages)
(2 pages)© 2020, manymanuals.com. All rights reserved. | 1.252 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals