Sony XR-C8200 User Manual download pdf

182 mm

53 mm

TOP

Installation

Precautions

•Do not tamper with the four holes on the upper surface of the unit. They are used for tuner adjustments

to be made only by service technicians.

•If you mount other Sony equipment with this unit, it is better to mount this unit in the lower position.

•There must be a distance of at least 15 cm between the cassettes slot of the unit and shift lever to insert

cassette easily. Choose the installation location carefully so the unit does not interfere with gear shifting

and other driving operations.

•Choose the mounting location carefully so the unit does not interfere with normal driving operations.

•Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or

hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.

•Use only the supplied mounting hardware for safe and secure installation.

Mounting angle adjustment

Adjust the mounting angle to less than 20°.

Mounting the unit in a Japanese car

You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony

dealer.

TOYOTA

to dashboard

Bracket

5 max. size 5 × 8 mm

Existing parts supplied to your car

NISSAN

max. size 5 × 8 mm

Claws

Cut all the claws from the unit with pincers

or other suitable tool.

Cassette

more than 15 cm

Shift lever

How to detach and attach the front panel

Before installing the unit, detach the front panel.

To detach

Before detaching the front panel, be sure to press (OFF) first.

Press (OPEN) to open up the front panel, then pull it off towards you.

To attach

Align the front panel to the unit , and push in.

To detach

To attach

Mounting example

Installation in the dashboard

To support the unit

Fire wall

With the TOP marking up

3 max. size 4 × 6 mm

Dashboard

Bend these claws, if necessary.

With the TOP marking up

to dashboard

5 max. size 5 × 8 mm

Bracket

Notes

• To prevent malfunction, install only with the supplied

screws 5.

• If you cannot mount the unit in the lower tier after cutting

off all claws, install it in the upper tier.

First attach 6 to the unit, then insert

the unit into 1.

Note for Connecting

If there is alternator noise (a whining sound when the engine increases speed), ground the master unit

by connecting it to a metal point of the car with the supplied chassis ground cord !™. Connect the

ground cord to the master unit with a screw 3. (See illustration.)

It is not necessary to install the

bracket 2 with Japanese cars.

!™

To a metal point of the car

Existing parts supplied to your car

1 2 3 4

Summary of Contents

Page 1 - Installation

182 mm53 mmTOPTOPInstallationPrecautions•Do not tamper with the four holes on the upper surface of the unit. They are used for tuner adjustmentsto be

Page 2 - Cassette Car

FM/AMCassette CarStereoSony Corporation  1998 Printed in JapanInstallation/ConnectionsXR-C8200Parts for installation and connectionsThe numbers in th

Page 3 - Connections

ConnectionsIf your car has no accessory position on the ignition key switch— POWER SELECT switchThe illumination on the front panel is factory set to

Page 4 - Connection example

Connection exampleNotes on the control leads• The power antenna control lead (blue) supplies +12 V DC when you turn on the tuner or when you activate

Comments to this Manuals

No comments

Sony XR-C8200 User Manual

Browse online or download User Manual for Motorcycle Accessories Sony XR-C8200. Sony XR-C8200 Installation guide

Summary of Contents

Comments to this Manuals

Related products and manuals for Motorcycle Accessories Sony XR-C8200