Sony CPD-E100P User Manual download pdf (Page 16)

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is

a problem with your monitor or computer, the screen will go

blank and the 1 (power) indicator will either light up green or

flash orange. If the 1 (power) indicator is lit in orange, the

computer is in power saving mode. Try pressing any key on the

keyboard or moving the mouse.

If the 1 (power) indicator is green

Disconnect the video input cable or turn off the

connected computer.

2 Press the 1 (power) button twice to turn the monitor

off and then on.

3 Move the control button , for 2 seconds before the

monitor enters power saving mode.

If all four color bars appear (white, red, green, blue), the monitor

is working properly. Reconnect the video input cable and check

the condition of your computer.

If the color bars do not appear, there is a potential monitor failure.

Inform your authorized Sony dealer of the monitor’s condition.

If the 1 (power) indicator is flashing orange

Press the 1 (power) button twice to turn the monitor off

and then on.

If the 1 (power) indicator lights up green, the monitor is working

properly.

If the 1 (power) indicator is still flashing, there is a potential

monitor failure. Count the number of seconds between orange

flashes of the 1 (power) indicator and inform your authorized

Sony dealer of the monitor’s condition. Be sure to note the model

name and serial number of your monitor. Also note the make and

model of your computer and graphic board.

Specifications

CRT 0.24 mm aperture grille pitch (center)

15 inches measured diagonally

90-degree deflection

Viewable image size Approx. 285 × 214 mm (w/h)

(11

/4 × 8

/2 inches)

14.0" viewing image

Resolution

Maximum Horizontal: 1280 dots

Vertical: 1024 lines

Recommended Horizontal: 800 dots

Vertical: 600 lines

Standard image area Approx. 270 × 202 mm (w/h)

(10

/4 × 8 inches)

Deflection frequency* Horizontal: 30 to 70 kHz

Vertical: 48 to 120 Hz

AC input voltage/current 220 to 240 V, 50 – 60 Hz, 0.8 A

Power consumption Max. 95 W

Dimensions

Approx. 356

378

388 mm (w/h/d)

(14

/8 × 15 × 15

/8 inches)

Mass Approx. 15 kg (33 lb 1 oz)

Plug and Play DDC2B

Supplied accessories See page 6

* Recommended horizontal and vertical timing condition

• Horizontal sync width should be more than 1.0 µsec.

• Horizontal blanking width should be more than 3.6 µsec.

• Vertical blanking width should be more than 500 µsec.

Design and specifications are subject to change without notice.

RESET

1 (power) indicator

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 87 88

Comments to this Manuals

No comments

Sony CPD-E100P User Manual Page 16

Comments to this Manuals

Related products and manuals for Monitors Sony CPD-E100P