Sony LF-PK1 User Manual download pdf (Page 50)

Others

LocationFree Player

General video

Problem Causes and remedies

Cannot connect a computer to the base

station via a wireless connection.

• Is the wireless LAN set up properly? Configure the same information

on the computer as you set on page 42.

• Check the frequency band (2.4 GHz band or 5 GHz band) supported by

your computer or wireless LAN card and set the base station to operate

at that frequency band.

Cannot register a computer on the base

station.

• Switch the base station to setup mode after you connect the computer to

the base station via a wireless connection or router.

• When connecting to one base station from multiple computers, a

separate serial key is required for each computer.

• To register a computer to a base station that is not on the same LAN,

you need to generate a password in [Device Registration] under

[Advanced Setup] on the base station settings screen and then enter the

password during registration. A password also needs to be entered

when registering a computer to the LF-X1/X5 base station. For details

on how to generate a password for LF-X1/X5 registration, refer to the

operating instructions for the LF-X1/X5.

Nothing is shown on the [Base Station

Selection] screen.

• Directly enter the IP address or domain name, or check the following

items.

- Is the base station turned on?

- Is the base station connected to the network?

- Check the settings of security software because the base station may

be blocked by the firewall function in anti-virus software or other

types of software.

- When connected via a wired LAN, make sure the base station and

computer are connected properly to the LAN ports of the router.

- If the connection settings of the base station were set manually, check

the IP address setting.

- Is a global IP address set for the WAN side of the router and a private

address set for the base station?

• If you are using a LAN with global IP addresses and the base station is

not detected for security reasons, you need to enter the IP address

assigned to the base station in the address field of your web browser.

Can connect at home, but cannot

connect to the base station while away

from home.

• Did you configure the network settings for when you are away from

home?

• Are the NetAV settings configured properly? (1 page 18)

• Are the base station and connected devices such as the router turned

on?

• NetAV cannot be used via a proxy server.

• Have the devices you are currently using been deleted from the device

registration list on the base station? Check the device registration list in

the base station settings. (1 page 41)

• Have you initialized the base station? If so, the device registration

information has been deleted. Perform the setup again from device

registration. (1 page 41)

Problem Causes and remedies

No color, poor color. Make sure the AV cable and antenna cable are connected properly to the

base station.

Picture appears but there is no sound. • Make sure the volume of LocationFree Player is not turned all the way

down.

• Make sure the volume of the computer is not set to the minimum level

or mute.

No picture. Check the causes and remedies described in “Watching TV at Home”

(1 page 52) or “Watching TV Away from Home” (1 page 52).

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 58 59

Comments to this Manuals

No comments

Sony LF-PK1 User Manual Page 50

Comments to this Manuals

Related products and manuals for Home Theater Systems Sony LF-PK1