Sony MHC-S7AV Operations Instructions download pdf (Page 34)

“DAILY 1”, “DAILY 2”, or “REC SELECT” does

not appear when you press TIMER SELECT (or

CLOCK/TIMER SELECT on the remote).

• Set the timer correctly.

• Set the clock.

The remote does not function.

• There is an obstacle between the remote and the

unit.

• The remote is not pointing in the direction of the

unit’s sensor.

• The batteries have run down. Replace the

batteries.

There is acoustic feedback.

• Decrease the volume level.

• Move the microphone away from the speakers or

change the direction of the microphone.

The color irregularity on a TV screen persists.

• Turn off the TV set once, then turn it on after

15 to 30 minutes. If the color irregularity still

persists, place the speakers farther away from the

TV set.

“PROTECT” and “PUSH POWER” appear

alternately.

• A strong signal is input. Turn off the power,

leave the system turned off for a while, then turn

on the power again. If “PROTECT” and “PUSH

POWER” still appear alternately, check the

speaker cords.

Speakers

Sound comes from only one channel or

unbalanced left and right volume.

• Check the speaker connection and speaker

placement.

• The source being played back is monaural.

• Adjust the balance parameters (page 26).

There is no sound from the center speaker.

• Set the center speaker level to the appropriate

level.

• Make sure the center speaker selection parameter

in the “SP. SETUP” menu is set to “YES”.

• Select a sound field containing the word

“CINEMA” or “VIRTUAL”.

There is no sound from the rear speakers.

• Set the rear speakers level to the appropriate

level.

• Make sure the rear speakers selection parameter

in the “SP. SETUP” menu is set to “YES”.

• Select a sound field containing the word

“CINEMA” or “VIRTUAL”.

• The software being played back has limited

sound effects. Check the volume with the test

tone.

Sound lacks bass.

• Check that the speaker’s + and – terminals are

connected correctly.

CD Player

The CD tray does not close.

• The CD is not placed properly.

The CD will not play.

• The CD is not lying flat in the disc tray.

• The CD is dirty (see page 32).

• The CD is inserted label side down.

• Moisture condensation has built up.

Playback does not start from the first track.

• The player is in Program Play or Shuffle Play

mode. Press PLAY MODE repeatedly until

“1 DISC” or “ALL DISCS” appears.

“OVER” is displayed.

• You have reached the end of the CD or tape by

pressing M to fast forward.

Troubleshooting (continued)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments

Sony MHC-S7AV Operations Instructions Page 34

Comments to this Manuals

Related products and manuals for Home audio sets Sony MHC-S7AV