Sony MHC-S7AV Operations Instructions download pdf (Page 35)

35

Additional Information

Tape Deck

The tape does not record.

• The tab has been removed from the cassette (see

“To save a tape permanently” on page 32).

• The tape has reeled to the end.

The tape does not record nor play, or there is a

decrease in sound level.

• The heads are dirty (see “Cleaning the tape

heads” on page 33).

• The record/playback heads are magnetized (see

“Demagnetizing the tape heads” on page 33).

The tape does not erase completely.

• The record/playback heads are magnetized (see

“Demagnetizing the tape heads” on page 33).

There is excessive wow or flutter, or the sound

drops out.

• The capstans or pinch rollers are dirty (see

“Cleaning the tape heads” on page 33).

Noise increases, or the high frequencies are

erased.

• The record/playback heads are magnetized (see

“Demagnetizing the tape heads” on page 33).

After pressing N (n) or Z, there is a

mechanical noise, “EJECT” appears in the

display, and the unit enters standby mode

automatically.

• The cassette tape has not inserted correctly.

Tuner

There is severe hum or noise (“TUNED” or

“STEREO” flashes in the display).

• Adjust the antenna.

• The signal is too weak. Connect an external

antenna.

A stereo FM program cannot be received in

stereo.

• Press STEREO/MONO so that “MONO”

disappears.

If other troubles not described above

occur, reset the system as follows:

1 While holding down DIGITAL, press

DISPLAY.

2 Press ?/1 to turn on the power.

The unit is reset to factory settings. All the

settings are cleared.

Specifications

Amplifier section

European model:

Front Speaker:

DIN power output (rated) 95 + 95 watts

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

120 + 120 watts

(6 ohms at 1 kHz, 10%

THD)

Music power output (reference)

200 + 200 watts

(6 ohms at 1 kHz, 10%

THD)

Center Speaker:

DIN power output (rated) 30 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

40 watts

(8 ohms at 1 kHz, 10%

THD)

Music power output (reference)

75 watts

(8 ohms at 1 kHz, 10%

THD)

Rear Speaker:

DIN power output (rated) 30 + 30 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

40 + 40 watts

(8 ohms at 1 kHz, 10%

THD)

Music power output (reference)

75 + 75 watts

(8 ohms at 1 kHz, 10%

THD)

continued

1 ... 34 35 36 ... 44

Comments to this Manuals

No comments