Sony CMT-HPR90 User Manual download pdf

CMT-HPR90.GB.2-668-124-11(1)

WARNING

To reduce the risk of ﬁre or electric

shock, do not expose this apparatus to

rain or moisture.

CAUTION

The use of optical instruments with this product will

increase eye hazard.

Notice for the customers in the

U.S.A.

2-668-124-11(1)

Micro HI-FI

Component System

Operating Instructions

CMT-HPR90

Printed on 100% recycled

paper using VOC (Volatile

Organic Compound)-free

vegetable oil based ink.

Hooking up the system securely

This symbol is intended to alert the

user to the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufﬁcient magnitude to constitute a risk

of electric shock to persons.

This symbol is intended to alert the

user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the appliance.

WARNING

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modiﬁcations

not expressly approved in this manual could void your

authority to operate this equipment.

Note to CATV system installer:

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and,

in particular, speciﬁes that the cable ground shall be

connected to the grounding system of the building, as

close to the point of cable entry as practical.

U.S.A., Canadian and Australian

models only

ENERGY STAR

is a U.S. registered

mark. As an ENERGY STAR

partner,

Sony Corporation has determined that

this product meets the ENERGY STAR

guidelines for energy efﬁciency.

Note on DualDiscs

A DualDisc is a two sided disc product which mates

DVD recorded material on one side with digital

audio material on the other side. However, since the

audio material side does not conform to the Compact

Disc (CD) standard, playback on this product is not

guaranteed.

Music discs encoded with

This product is designed to playback discs that

conform to the Compact Disc (CD) standard. Recently,

various music discs encoded with copyright protection

technologies are marketed by some record companies.

Please be aware that among those discs, there are some

that do not conform to the CD standard and may not be

playable by this product.

• ATRAC, ATRAC3, ATRAC3plus and their logos are

trademarks of Sony Corporation.

• SonicStage and SonicStage logo are trademarks or

registered trademarks of Sony Corporation.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

Antennas

Find a location and an orientation that provide

good reception, and then set up the antenna.

Keep the antennas away from the speaker cords

and the power cord to avoid picking up noise.

FM lead antenna

(Extend it horizontally.)

AM loop antenna

Power

Connect the power cord to a wall socket.

If the plug does not ﬁt the wall socket, detach the supplied

plug adaptor (only for models equipped with an adaptor).

Right speaker

Wall socket

Left speaker

Basic Operations

Before using the system

To use the remote

Slide and remove the battery compartment lid



, and

insert the two supplied R6 (size AA) batteries,  side

ﬁrst, matching the polarities shown below.

Notes on using the remote

• With normal use, the batteries should last for about six months.

• Do not mix an old battery with a new one or mix different types of

batteries.

• If you do not use the remote for a long period of time, remove the

batteries to avoid damage from battery leakage and corrosion.

To set the clock

1 Turn on the system.

Press  (power)



2 Select the clock set mode.

Press CLOCK/TIMER SET



on the remote. If the

current mode appears on the display, press /



on the remote repeatedly to select “CLOCK SET”

and then press ENTER



on the remote.

3 Set the time.

Press /



on the remote repeatedly to set

the hour, and then press ENTER



on the remote.

Use the same procedure to set the minute.

When you turn off the system after setting the clock,

the clock display appears instead of the demonstration

display.

The clock settings are lost when you disconnect the

power cord or if a power failure occurs.

Selecting a music source

Press the following buttons (or press FUNCTION



repeatedly).

To select Press

CD  on the remote.

Tuner

TUNER/BAND .

Component (connected

using an audio cord)

AUDIO IN .

Adjusting the sound

To adjust the volume

Press VOLUME +/– on the remote (or turn the

VOLUME control on the unit)



To add a sound effect

To Press

Generate a more dynamic

sound (Dynamic Sound

Generator X-tra)

DSGX  on the unit.

Set the sound effect

EQ  on the remote

repeatedly to select “BASS”

or “TREBLE,” and then

press +/–  on the remote

repeatedly to adjust the level.

Playing a CD/ATRAC/MP3 disc

1 Select the CD function.

Press CD



on the remote.

2 Place a disc.

Press  (CD open/close)



on the unit, and place a

disc with the label side up on the disc tray.

To insert additional discs, slide the disc tray with your

ﬁnger as shown below.

To close the disc tray, press  (CD open/close)



the unit again.

Do not force the disc tray closed with your ﬁnger, as

this may damage the unit.

3 Start playback.

Press  (play)



on the remote (or CD/ (play/

pause)



on the unit).

To Press

Pause playback

 (pause)  on the remote (or

CD/ (play/pause)  on the

unit). To resume play, press the

button again.

Stop playback

 (stop) .

Select a folder on

an “ATRAC” disc or

MP3 disc

+/– (select folder) . Or

turn the jog dial  on the unit

and press PUSH ENTER  on

the unit (turn the jog dial  on

the unit during playback until

“GROUP” appears, and then

press PUSH ENTER  on the

unit to select the desired folder).

Select a track or ﬁle

/ (go back/go forward)

. Or turn the jog dial  on

the unit and press PUSH ENTER

 on the unit. To cancel, press

CANCEL  on the unit.

Find a point in a

track or ﬁle

Hold down / (rewind/fast

forward)  during playback,

and release the button at the

desired point.

Select Repeat Play

REPEAT  repeatedly until

“REP” or “REP1” appears.

Select a disc

DISC SKIP  on the remote (or

DISC 1 – 5  or DISC SKIP 

(in stop mode) on the unit).

Switch to CD

function from

another source

DISC 1 – 5  on the unit

(Automatic Source Selection).

Exchange other

discs while playing

EX-CHANGE  on the unit.

To change the play mode

Press PLAY MODE



repeatedly while the player is

stopped. You can select normal play (“ALL DISCS” for

all discs, “1DISC” for a disc, or “ *” for all “ATRAC”

ﬁles and MP3 ﬁles in the folder on the disc), shufﬂe

play (“ALL DISCS SHUF,” “1DISC SHUF,” or “

SHUF*”), or program play (“PGM”).

* When playing a CD-DA disc, (SHUF) Play performs the same

operation as 1DISC (SHUF) Play.

To create an “ATRAC”/MP3 disc

You can create an “ATRAC” disc and MP3 disc with the

SonicStage software. SonicStage can be downloaded free

of charge from the following sites and installed on your

computer.

For customers in the U.S.A.:

<http://www.sony.com/shelfsupport>

For customers in Canada:

<http://www.sony.ca/ElectronicsSupport/>

Please see the instructions at the sites or SonicStage Help

of the software for how to install and how to create an

“ATRAC”/MP3 disc.

Note on the jog dial

Only the ﬁrst 6 characters are displayed when performing the folder

search, track search, or ﬁle search.

Notes on Repeat Play

• All tracks or ﬁles on a disc are played repeatedly up to ﬁve times.

• You cannot select “REP” and “ALL DISCS SHUF” at the same

time.

• “REP 1” indicates that a single track or ﬁle is repeated until you

stop it.

Notes on playing MP3 discs

• Do not save other types of ﬁles or unnecessary folders on a disc that

has “ATRAC” and MP3 ﬁles.

• Folders that have no “ATRAC” and MP3 ﬁles are skipped.

• “ATRAC” and MP3 ﬁles are played back in the order that they are

recorded onto the disc.

• The system can only play MP3 ﬁles that have a ﬁle extension of

“.MP3.”

• If there are ﬁles on the disc that have the “.MP3” ﬁle extension,

but that are not MP3 ﬁles, the unit may produce noise or may

malfunction.

• The maximum number of:

– “ATRAC” folders is 255.

– “ATRAC” ﬁles is 999.

– MP3 folders is 255 (including the root folder).

– MP3 ﬁles is 511.

–

MP3 ﬁles and folders that can be contained on a single disc is 512.

– folder levels (the tree structure of ﬁles) is 8.

• Compatibility with all MP3 encoding/writing software, recording

device, and recording media cannot be guaranteed. Incompatible

MP3 discs may produce noise or interrupted audio or may not play

at all.

• If “ATRAC” ﬁles and MP3 ﬁles are recorded on the same disc, this

system plays the “ATRAC” ﬁles ﬁrst.

Notes on playing multisession discs

• If the disc begins with a CD-DA (or “ATRAC”/MP3) session, it is

recognized as a CD-DA (or “ATRAC”/MP3) disc, and other sessions

are not played back.

• A disc with a mixed CD format is recognized as a CD-DA (audio)

disc.

Listening to the radio

1 Select “FM” or “AM.”

Press TUNER/BAND



repeatedly.

2 Select the tuning mode.

Press TUNING MODE



repeatedly until “AUTO”

appears.

3 Tune in the desired station.

Press +/– on the remote (or TUNING +/– on the unit)



. Scanning stops automatically when a station is

tuned in, and then “TUNED” and “STEREO” (for

stereo programs) appear.

To stop automatic scanning

Press  (stop)



To tune in a station with a weak signal

If “TUNED” does not appear and the scanning does

not stop, press TUNING MODE



repeatedly until

“AUTO” and “PRESET” disappear, and then press

+/– on the remote (or TUNING +/– on the unit)



repeatedly to tune in the desired station.

To reduce static noise on a weak FM stereo

station

Press FM MODE



repeatedly until “MONO” appears

to turn off stereo reception.

Changing the display

To change Press

Information on

the display*

DISPLAY  repeatedly when the

system is on.

Display mode

(See below.)

DISPLAY  repeatedly when the

system is off.

* For example, you can view CD/“ATRAC”/MP3 disc information,

such as the track or ﬁle number or folder name during normal play,

or the total play time while the player is stopped.

The system offers the following display modes.

Display mode When the system is off,

Demonstration The clock display is replaced by

lighting and ﬂashing of the display

window.

Clock The clock is displayed.

Power Saving

Mode

The display is turned off to conserve

power. The timer and clock continue

to operate.

The STANDBY indicator lights up when the system is off.

When the system is in Power Saving Mode, the following functions

are unavailable:

– setting the clock

– changing the AM tuning interval

– changing the CD power manage function

   

























  













































Notes on the display information

• The following are not displayed;

– total playing time for a CD-DA disc depending on the play mode.

– total playing time for an “ATRAC”/MP3 disc.

– remaining playing time for an MP3 ﬁle.

• The following are not displayed correctly;

– elapsed playing time of an “ATRAC” ﬁle or MP3 ﬁle encoded

using a VBR (variable bit rate).

– folder and ﬁle names that do not follow either the ISO9660 Level

1, Level 2 or Joliet in the expansion format.

• The following are displayed;

– ID3 tag information for “ATRAC” ﬁles and MP3 ﬁles when ID3

version 1 and version 2 tags are used.

– up to 62 characters of ID3 tag information using uppercase letters

(A to Z), numbers (0 to 9), and symbols (" $ % ’ ( ) * + , – . / < =

> @ [ \ ] _ ` { | } ! ? ^).

Using optional audio

components

To connect an optional headphones

Connect headphones to the PHONES jack



on the

unit.

To connect an optional component

Connect additional audio component to the AUDIO

IN jack



on the unit using an audio analog cord (not

supplied). Turn down the volume on the system, and then

press FUNCTION



on the remote repeatedly to select

the AUDIO IN function.

When carrying this system

1 Remove all discs to protect the CD mechanism.

2 Press CD



on the remote to select the CD

function.

3 Hold down  (stop)



on the unit, and press

DISC 1



until “LOCK” appears.

4 Unplug the power cord.

Brown side for

other regions

White side for North

American model

Speakers

Owner’s Record

The model and serial numbers are located on the rear of the unit. Record these numbers in the space

provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No. ______________ Serial No. ______________

1 2

Summary of Contents

Page 1 - Component System

CMT-HPR90.GB.2-668-124-11(1)WARNINGTo reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.CAUTIONThe use of opt

Page 2 - Using the Timers

CMT-HPR90.GB.2-668-124-11(1)Other OperationsCreating your own CD program (Program Play)Use buttons on the remote to create your own program.1 Press C

Sony CMT-HPR90 User Manual

Browse online or download User Manual for Home audio sets Sony CMT-HPR90. Sony CMT-HPR90 User manual

Summary of Contents

More documents for Home audio sets Sony CMT-HPR90

Comments to this Manuals

Sony CMT-HPR90 User Manual

Browse online or download User Manual for Home audio sets Sony CMT-HPR90. Sony CMT-HPR90 User manual

Summary of Contents

More documents for Home audio sets Sony CMT-HPR90

Comments to this Manuals

Related products and manuals for Home audio sets Sony CMT-HPR90