Sony MHC-V4D User Manual download pdf (Page 36)

model name [MHC-V4D]

[4-540-486-13(1)] GB

36

GB

filename[D:\NORM'S JOB\SONY HA\SO1500XX\MHC-V4D_PMRF

03\4540486131_GB\070TUN.fm]

masterpage:Left

3 Hold down BLUETOOTH on the

unit for 2 seconds or more.

“PAIRING” flashes in the display

panel.

4 Perform the pairing procedure

on the Bluetooth device.

For details, refer to the operating

instructions of your Bluetooth device.

5 Select “SONY:MHC-V4D” on the

display of the Bluetooth device.

If passkey is required on the Bluetooth

device, enter “0000”.

6 Perform the Bluetooth

connection on the Bluetooth

device.

When pairing is completed and the

Bluetooth connection is established,

the Bluetooth device name appears in

the display panel.

Depending on the Bluetooth device,

connection may start automatically

after pairing is completed.

You can check the Bluetooth device

address by pressing DISPLAY

repeatedly.

Notes

• You can pair up to 9 Bluetooth devices. If the

10th Bluetooth device is paired, the oldest

paired device will be deleted.

• “Passkey” may be called “Passcode”, “PIN

code”, “PIN number”, or “Password”, etc.,

depending on the device.

• The pairing standby status of the system is

canceled after about 5 minutes. If pairing is

not successful, repeat from step 1.

• If you want to pair with another Bluetooth

device, repeat steps 1 to 6.

To cancel pairing operation

Hold down BLUETOOTH on the unit for

2 seconds or more until “BT AUDIO”

appears in the display panel.

You can operate a Bluetooth device by

connecting the system and the Bluetooth

device using AVRCP.

Check the following before playing

music:

– The Bluetooth function of the Bluetooth

device is turned on.

– Pairing has been completed.

1 Press BLUETOOTH on the unit

to select Bluetooth function.

“BT AUDIO” appears in the display

panel.

2 Establish connection with the

Bluetooth device.

Press BLUETOOTH on the unit to

connect to the last connected Bluetooth

device.

Perform the Bluetooth connection

from the Bluetooth device if the device

is not connected.

Once the connection is established, the

Bluetooth device name appears in the

display panel.

3 Press N to start playback.

Depending on the Bluetooth device,

– you may have to press N twice.

– you may need to start playing an

audio source on the Bluetooth

device.

Notes

• When the system is not connected to any

Bluetooth device, the system will connect to

the last connected Bluetooth device

automatically when you press N.

• If you try to connect another Bluetooth device

to the system, the current connected Bluetooth

device will be disconnected.

Playing music from a

Bluetooth device

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Comments to this Manuals

No comments