Sony DVP-NS36 User Manual download pdf (Page 40)

• When playing DVD-RW/DVD-R in VR mode: If

you connect to an AV amplifier (receiver) using

the DIGITAL OUT (COAXIAL) jack and want to

switch between the sound tracks, set “DOLBY

DIGITAL” to “D-PCM” in “AUDIO SETUP.”

Checking the audio signal

format

You can check the audio signal format by

pressing (audio) repeatedly during

playback. The format of the current audio

signal (Dolby Digital, DTS, PCM, etc.)

appears as shown below.

◆When playing a DVD VIDEO

Example:

Dolby Digital 5.1 ch

Example:

Dolby Digital 3 ch

◆When playing a DivX video file on a DATA

CD or a DATA DVD

Example:

MP3 audio

About audio signals

Audio signals recorded in a disc contain the

sound elements (channels) shown below.

Each channel is output from a separate

speaker.

• Front (L)

• Front (R)

•Centre

• Rear (L)

• Rear (R)

• Rear (Monaural): This signal can be either

the Dolby Surround Sound processed

signals or the Dolby Digital sound’s

monaural rear audio signals.

• LFE (Low Frequency Effect) signal

Notes

• If “DTS” in “AUDIO SETUP” is set to “OFF,”

the DTS track selection option will not appear on

the screen even if the disc contains DTS tracks

(page 66).

• MPEG audio signals with more than two channels

will appear as shown above (3/2.1, 2/1), but only

the Front (L) and Front (R) signals will be output

from your two front speakers.

ENGLISH DOLBY DIGITAL

3 / 2 .1

Rear (L/R)

Front (L/R)

+ Centre

LFE (Low Frequency

Effect)

SPANISH DOLBY DIGITAL

2 / 1

Front (L/R) Rear

(Monaural)

1: MP3 128k

Bit rate

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Comments to this Manuals

No comments

Sony DVP-NS36 User Manual Page 40

Comments to this Manuals

Related products and manuals for DVD players Sony DVP-NS36