Sony HDR-CX500E User Manual download pdf (Page 9)

9

GB

The clock is adjusted automatically by

[AUTO CLOCK ADJ] when you turn off your

camcorder if the camcorder is receiving a GPS

signal while it is being used. The clock is not

adjusted until the camcorder is turned off. Also,

the clock is not adjusted unless the camcorder

is receiving a GPS signal, even if the GPS switch

is set to ON.

The [AUTO AREA ADJ] function automatically

compensates for a time difference when it

detects a time differences with the current area.

The clock may not be adjusted to the correct

time automatically, depending on the country/

region selected for your camcorder. In this case,

set [AUTO CLOCK ADJ] and [AUTO AREA

ADJ] to [OFF].

COORDINATES

During playback, your camcorder can

display the coordinates information

recorded on movies and photos.

Touch (MENU) 

 [PLAYBACK SET] (under

[PLAYBACK] category)  [DATA

CODE]  [COORDINATES] 

 .

Latitude

Longitude







Trouble shooting

The camcorder is not receiving a GPS

signal.

Your camcorder may not be able to receive

radio signals from GPS satellites because of

obstructions. Bring your camcorder to an

open area, and set the GPS switch to ON

again.

The current location on the map of the

camcorder is different from the actual

current location.

The margin of error of the radio signal from

GPS satellites is large. The margin of error can

be as wide as several-hundred meters at the

maximum.





1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comments to this Manuals

No comments