Sony VPL-EW5 User Manual download pdf (Page 12)

12

Location and Function of Controls

a ?/1 (On/Standby) key

Turns on the projector when the

projector is in standby mode. To turn off

the power, press the ?/1 key twice

according to the message or hold the ?/1

key for about one second.

Lights up or flashes under the following

conditions:

– Lights in red when the AC power cord

is plugged into a wall outlet. Once the

projector is in standby mode, you can

turn it on with the ?/1 key.

– Flashes in red when the temperature

becomes high inside the projector, or

when the projector fails to operate.

– Lights in green when the power is

turned on, and when it is ready to

operate.

– Flashes in green from the projector is

turned on until the projector is ready to

operate. Also, flashes in green while

the cooling fan is running after the

power is turned off with the ?/1 key.

The fan runs for about 90 seconds after

the power is turned off.

– Lights in orange when the power

saving mode is on.

For detail, see page 24.

b INPUT key

Selects an input signal. The input signal

will change whenever you press the key.

c ENTER/V/v/B/b (Arrow) keys

Used to enter the settings of items in the

menu system, select a menu, or make

various adjustments.

d LAMP/COVER indicators

Flashes in orange under the following

conditions:

• A reception rate of 2 flashes when the

lamp cover or air filter cover is not

secured firmly.

• A reception rate of 3 flashes when the

lamp has reached the end of its life or

reaches a high temperature.

Control Panel

123 456

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 61 62

Comments to this Manuals

No comments