Sony J30SDI User Manual download pdf (Page 47)

Chapter 7 Setup Menu

Chapter 7 Setup Menu 7-11

Item number

Item name

Settings

501

STILL TIMER

Sets the time interval from the tape stop mode to the tape protection mode.

In order to protect the video heads and the tape, this unit enters the tape

protection mode automatically after a certain amount of time has elapsed since

the unit entered the tape stop mode (STOP mode or a still picture in jog/shuttle

mode).

0.5S ... 8M ... 30M: Set the value in the range 0.5 seconds to 30 minutes.

651 UMID OUTPUT

(J-30SDI only)

When using the Digital Betacam or MPEG IMX format, select whether or not to

output the UMID data recorded on the tape from the SDI output connector and

the type of the UMID data if it is output.

OFF : Do not output the UMID data.

BASIC: Output as the Basic UMID data (32 byte).

EXTENDED: Output as the Extended UMID data (64 byte).

Notes

• Even if EXTENDED is selected, Basic UMID is output if Basic UMID is recorded

on the tape being played back.

• When menu item 901, VIDEO OUTPUT DATA is set to 8Bit, nothing of UMID is

output.

657 ESSENCE MARK TAPE

OUTPUT

(J-30SDI only)

When using the Digital Betacam or MPEG IMX format, select whether or not to

output essence marks recorded on the tape from the SDI output connector.

ON: Output essence marks recorded on the tape.

OFF : Do not output essence marks recorded on the tape.

Note

When menu item 901, VIDEO OUTPUT DATA is set to 8Bit, nothing of essence

marks is output.

658 SHOT MARK ESSENCE

MARK CONVERT

(J-10SDI/30SDI only)

When using the Digital Betacam, MPEG IMX or Betacam SX format, select

whether or not to convert shot marks recorded in the LTC track into essence

marks and output them from the SDI output connector.

ON: Convert shot marks into essence marks and output.

OFF : Do not convert shot marks into essence marks.

Depending on the type of the detected shot marks, the output essence marks are

“_RecStart”, “_ShotMark1”, or “_ShotMark2”.

Notes

• Of the shot marks, post marks are not converted to essence marks.

• Shot mark detection timing depends on playback conditions.

• When menu item 901, VIDEO OUTPUT DATA is set to 8 bit, nothing of essence

marks is output.

660 ESSENCE MARK VANC

LINE

(J-10SDI/30SDI only)

When menu item 658 is set to ON, specify the line into which to insert shot marks

converted into essence marks.

12H, 13H, 15H, 16H, 17H 18H, 19H (525-line mode)

09H, 10H, 12H, 13H, 14H, 15H, 16H, 17H , 18H (625-line mode)

715

VIDEO GAIN CONTROL Adjust the video output level. The only Y signal adjustment is permitted.

Default value: 20H

717

CHROMA PHASE

CONTROL

Adjust the chroma phase. The only composite output signal adjustment is permitted.

Default value: 80H

718

SETUP LEVEL (525 mode)/

BLACK LEVEL (625 mode)

Adjust the setup level (black level).

Default value: 0H

716

CHROMA GAIN

CONTROL

Adjust the chroma output level.

Default value: 20H

710 INTERNAL VIDEO

SIGNAL GENERATOR

Select the test signal to be output from the VTR’s internal test signal generator.

OFF : No test signal is generated. (The VTR operates normally.)

CB75: 75% color bar signal

713

VIDEO SETUP

REFERENCE LEVEL

(When operating in 525

mode)

Set the setup amount to be added to the composite output signal.

Default value: 0.0%

7.5%

a) Menu items 713 and 715 to 718 can be used only for

video processing of the analog video signal. They

cannnot be used for video processing of the digital video

signal (SDI/DV output).

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 56 57

Comments to this Manuals

No comments

Sony J30SDI User Manual Page 47

Comments to this Manuals

Related products and manuals for Clock Sony J30SDI