Sony J30SDI User Manual download pdf (Page 25)

Chapter 4 Playback

Chapter 4 Playback 4-1

SHIFT button

Cassette compartment

PLAY button

Chapter 4

Playback

4-1 Playback Procedures

If you play back to the end of the tape

The tape is automatically rewound, and stops.

(When AUTO REWIND, extended menu item 125, is

set to ENA)

Notes

• If you playback a Betacam/Betacam SP cassette

immediately after playing back a Betacam SX

cassette or Digital Betacam cassette, it may take

several seconds for playback to start.

• This unit uses an auto-tracking function (when using

the Digital Betacam or MPEG IMX format). The

factory setting for the auto-tracking is on (AUTO

TRACKING ON). You can turn auto-tracking off.

For details on how to change the setting, contact your

nearest Sony dealer. While this unit is pulling the

tape in, the PLAY button indicator B flashes.

When using the Dolby C NR system

When using an analog Betacam cassette, you can use

Dolby C NR for audio playback.

To activate the Dolby NR system, press the AU MON

SEL/DOLBY C NR button while holding down the

SHIFT button on the control panel.

STOP button

AU MON SEL/

DOLBY C NR button

4-1-1 Normal Playback

Insert a cassette beforehand.

For details of how to insert a cassette, see the section

“Inserting and ejecting cassettes” on page 3-2.

To start playback

Press the PLAY button.

To stop playback

Press the STOP button.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 56 57

No comments

Sony J30SDI User Manual Page 25