Sony J30SDI User Manual download pdf (Page 17)

Chapter 2 Location and Function of Parts

2-6 Chapter 2 Location and Function of Parts

2-1 Control Panel

Tape transport indicator area

• Tape transport indicator

When you press each button in the tape transport

control section, the corresponding indicators light.

m: REW (rewind) indicator

B: PLAY indicator

When AUTO TRACKING (the automatic tape

loading function) is in operation, this indicator

flashes.

M: F FWD (fast forward) indicator

x: STOP indicator

• JOG/SHTL (jog/shuttle) indicator

The “JOG” indicator lights when playback is carried

out in jog mode, and the “SHTL” indicator lights

when playback is carried out in shuttle mode.

• JOG/SHTL (jog/shuttle) transport indicator

b: Jog/shuttle reverse indicator (green)

B: Jog/shuttle forward indicator (green)

x: Jog/shuttle still indicator (red)

2-1-2 Search Control Section

1 JOG/SHUTTLE button

Use this button to toggle between jog mode and shuttle

mode when using the JOG dial or SHUTTLE dial.

Press this button once for playback in jog mode, or

press this button twice for playback in shuttle mode

during playback or F FWD/REW. The corresponding

“JOG” indicator or “SHTL” indicator lights in the

display section.

2 JOG dial

Turn this to carry out playback in the modes shown in

the table in the right column. Turn the dial clockwise

for forward playback and counterclockwise for reverse

playback.

3 SHUTTLE dial

Turn this to carry out playback in the modes shown in

the following table. Turn the dial clockwise for

forward playback and counterclockwise for reverse

playback.

After pressing the JOG/SHUTTLE button, turn the

JOG dial for playback in jog mode and the SHUTTLE

dial for playback in shuttle mode.

Playback modes using the JOG/SHUTTLE dial

Notes

•Normally, you turn the SHUTTLE dial after setting

the jog/shuttle mode by pressing the JOG/SHUTTLE

button. However, you can also set the jog/shuttle

mode simply by turning the dial. (This feature is

available when SELECTION FOR JOG/SHUTTLE

DIAL ENABLE, extended menu item 101 of the

setup menu, is set to DIAL.) In this case, you must

reset the SHUTTLE dial to the center position after

turning it, otherwise the dial may be moved by

vibration and the tape may start running in the shuttle

mode during playback.

1 JOG/SHUTTLE button

2 JOG dial

3 SHUTTLE dial

Playback mode Operations and functions

Jog Press the JOG/SHUTTLE button once to

light “JOG,” then turn the JOG dial, or

simply turn the JOG dial without lighting

“JOG.” Playback is carried out at a

speed corresponding to the rotating

speed of the JOG dial. The playback

speed range is from –1 to +1 times

normal speed.

The JOG dial has no detents.

Shuttle Press the JOG/SHUTTLE button twice to

light “SHTL,” then turn the SHUTTLE

dial, or simply turn the SHUTTLE dial

without lighting “SHTL.” Playback is

carried out at a speed corresponding to

the angular position of the SHUTTLE

dial. The playback speed range is as

follows.

When using a Digital Betacam tape

(J-30/30SDI): –21 to +21 times normal

speed

When using an MPEG IMX tape (J-30/

30SDI): –32/–38 to +32/+38 times

normal speed (NTSC/PAL)

When using a Betacam SX tape: –35

to +35 times normal speed

When using an analog Betacam tape:

–18/–20 to +18/+20 times normal

speed (NTSC/PAL)

The SHUTTLE dial has detents at the

center position, and at that point a still

picture is displayed.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 56 57

Comments to this Manuals

No comments

Sony J30SDI User Manual Page 17

Comments to this Manuals

Related products and manuals for Clock Sony J30SDI