Sony CDX-GT220 User Manual download pdf (Page 9)

9

Other functions

Changing the sound settings

Adjusting the sound

characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer

volume.

1 Press the select button repeatedly

until “BAL,” “FAD” or “SUB” appears.

The item changes as follows:

LOW*

1

t MID*

1

t HI*

1

t

BAL (left-right) t FAD (front-rear) t

SUB (subwoofer volume)*

2

t AUX*

3

*1 When EQ3 is activated (page 9).

*2 When the audio output is set to “SUB” (page 9).

“ATT” is displayed at the lowest setting, and can

be adjusted up to 21 steps.

*3 When AUX source is activated (page 10).

2 Rotate the volume control dial to

adjust the selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your

own equalizer settings.

1 Select a source, then press (EQ3)

repeatedly to select “CUSTOM.”

2 Press the select button repeatedly

until “LOW,” “MID” or “HI” appears.

3 Rotate the volume control dial to

adjust the selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Example: CDX-GT320/GT32W

Repeat steps 2 and 3 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold the select button before the

setting is complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until the desired item appears.

3 Rotate the volume control dial to

select the setting (example “ON” or

“OFF”).

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

The following items can be set (follow the page

reference for details):

“

z” indicates the default settings.

CLOCK-ADJ (Clock Adjust) (page 5)

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

AUX-A*

1

(AUX Audio)

To turn the AUX source display “AUX-A-ON”

(

z) or “AUX-A-OFF” (page 10).

A.OFF (Auto Off)

To shut off automatically after a desired time

when the unit is turned off,

– “A.OFF-NO” (

z), “A.OFF-30S (Seconds),”

“A.OFF-30M (Minutes)” or “A.OFF-60M

(Minutes).”

SUB/REAR*

1

To switch the audio output.

– “SUB-OUT” (

z): to output to a subwoofer.

– “REAR-OUT”: to output to a power amplifier.

DEMO

(Demonstration)

To set “DEMO-ON” (z) or “DEMO-OFF.”

DIM (Dimmer)

To change the brightness of the display.

– “DIM-ON”: to dim the display.

– “DIM-OFF” (

z): to deactivate the dimmer.

M.DSPL (Motion Display)

To select the Motion Display mode.

CDX-GT320/GT32W

–“M.DSPL-SA” (

z): to show moving patterns

and spectrum analyzer.

– “M.DSPL-OFF”: to deactivate the Motion

Display.

CDX-GT220/GT22W/GT120

– “M.DSPL-ON” (

z): to show moving patterns.

– “M.DSPL-OFF”: to deactivate Motion

Display.

continue to next page t

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comments to this Manuals

No comments