Sony STRDH820 User Manual download pdf (Page 39)

100

D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STR-

DH820-CEL.fm

masterpage: Right

STR-DH820

4-266-497-11(2)

Preparing the Receiver

7 Press V/v repeatedly to select

the item you want, then press

• Retry: Performs the Auto Calibration

again.

• Save: Save the measurement results and

exits the setting process.

• Warning: Displays warning related to

the measurement results. See “Message

list after Auto Calibration

measurement” (page 40).

• Exit: Exits the setting process without

saving the measurement results.

8 Save the measurement result.

Select “Save” in step 7.

Note

You can select the calibration type you want by

using the “Custom” Auto Calibration

(page 40).

9 Disconnect the optimizer

microphone from the receiver.

Note

If you reposition your speaker, we recommend that

you perform Auto Calibration again to enjoy the

surround sound.

Tips

• You can change the unit of distance in “Distance

Unit” in the Speaker settings menu (page 71).

• The size of a speaker (“Large”/“Small”) is

determined by the low frequency characteristics.

The measurement results may vary, depending on

the position of the optimizer microphone and

speakers, and the shape of the room. It is

recommended that you apply the measurement

results. However, you can change those settings in

the Speaker Settings menu. Save the measurement

results first, then try to change the settings.

To cancel Auto Calibration

The Auto Calibration function will be

canceled when you perform the following

during the measurement process:

– Press ?/1.

– Press the input buttons on the remote control

or turn the INPUT SELECTOR on the

receiver.

– Press MUTING or .

– Press SPEAKERS on the receiver.

– Change the volume level.

– Connect the headphones.

– Press SHIFT, then press AUTO CAL.

To check error code or warning message

obtained in “Performing Auto Calibration”

(page 38), proceed with the following steps.

Press V/v to select “Warning” in

step 7 in “Performing Auto

Calibration” (page 39) then press

If a warning message appears, check the

message and use the receiver without change.

Or if necessary, perform Auto Calibration

again.

When “Error Code” appears

Check the error and perform Auto Calibration

again.

1 Press to select “ENTER”.

“RETRY ?” appears on the TV screen.

2 Press B/b to select “YES”, then press

3 Repeat steps 6 to 9 in “Performing Auto

Calibration” (page 38).

Checking the Auto Calibration

results

continued

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 99 100

Comments to this Manuals

No comments

Sony STRDH820 User Manual Page 39

Comments to this Manuals

Related products and manuals for AV receivers Sony STRDH820