Sony STRDH820 User Manual Page 25
- Page / 100
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
25
GB
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STR-
DH820-CEL.fm
masterpage: Right
STR-DH820
4-266-497-11(2)
Connections
• The audio and video signals of HDMI input
are not output from the HDMI TV OUT jack
while the GUI menu is displayed.
• When you want to listen to the sound from
the TV speaker, set the “Audio Out” to
“TV+AMP” in the HDMI Settings menu
(page 73). If you cannot play back multi
channel audio source, set to “AMP”.
However, the sound will not output through
the TV speaker.
• DSD signals of Super Audio CD are not
input and output.
• Be sure to turn the receiver on when the
video and audio signals of a playback
equipment are being output to a TV via the
receiver. If you set the “Pass Through” to
“OFF”, video and audio signals will not be
transmitted when the power is turned off.
• Audio signals (format, sampling frequency,
bit length, etc.) transmitted from an HDMI
jack may be suppressed by the connected
equipment. Check the setup of the connected
equipment if the image is poor or the sound
does not come out of the equipment
connected via the HDMI cable.
• Sound may be interrupted when the
sampling frequency, the number of channels
or audio format of audio output signals from
the playback equipment is switched.
• When the connected equipment is not
compatible with copyright protection
technology (HDCP), the image and/or the
sound from the HDMI TV OUT jack may be
distorted or may be lost.
If this is the case, check the specification of
the connected equipment.
• You can enjoy High Bitrate Audio (DTS-HD
Master Audio, Dolby TrueHD), Multi
Channel Linear PCM only with an HDMI
connection.
• Set the image resolution of the playback
equipment to more than 720p/1080i to enjoy
High Bitrate Audio (DTS-HD Master
Audio, Dolby TrueHD).
• The image resolution of the playback
equipment may need to be at certain settings
before you can enjoy Multi Channel Linear
PCM. Refer to the operating instructions of
the playback equipment.
• To enjoy 3D images, connect 3D-compatible
TV and video equipment (Blu-ray Disc
player, Blu-ray Disc recorder, PlayStation 3,
etc.) to the receiver using High Speed HDMI
cables, put on 3D glasses, and then play back
a 3D-compatible content.
• Depending on the TV or the video
equipment, 3D images may not be
displayed.
• Not every HDMI equipment supports all
functions that are defined by the specific
HDMI version. For example, equipment that
support HDMI, version 1.4, may not support
Audio Return Channel (ARC).
• Refer to the operating instructions of each
connected equipment for details.
• Before connecting cords, be sure to
disconnect the AC power cord (mains lead).
• It is not necessary to connect all the cords.
Connect according to the availability of
jacks on the connected equipment.
• Use a High Speed HDMI cable. If you use a
Standard HDMI cable, 1080p, Deep Color
(Deep Colour) or 3D images may not be
displayed properly.
• We do not recommend using an HDMI-DVI
conversion cable. When you connect an
HDMI-DVI conversion cable to a DVI-D
equipment, the sound and/or the image may
be lost. Connect a separate audio cords or
digital connecting cords, then set the “Input
Assign” in the Input Option menu when the
sound is not output correctly.
• When connecting optical digital cords, insert
the plugs straight until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
When connecting cords
continued
- Multi Channel AV 1
- Receiver 1
- Owner’s Record 2
- About This Manual 4
- Table of Contents 6
- Supplied accessories 7
- Inserting batteries into the 8
- Front panel 9
- 34 5 876 10
- DH820-CEL.fm 11
- STR-DH820 11
- 4-266-497-11(2) 11
- Rear panel 12
- Remote control 13
- / to display text 14
- Getting started 18
- 1: Installing the speakers 19
- 2: Connecting the speakers 21
- Bi-amplifier connection 22
- 3: Connecting the TV 23
- 4a: Connecting the video 24
- When connecting cords 25
- Converting video signals 26
- Connections 27
- Connecting a PlayStation 3 29
- Connecting other equipment 30
- Notes on converting video 31
- To connect a recording 31
- 4b: Connecting the audio 32
- 5: Connecting the 33
- 6: Connecting the AC 33
- Preparing the Receiver 34
- Selecting the speaker pattern 34
- Setting the surround back 35
- Using AUTO 36
- CALIBRATION 36
- 1 Select the speaker pattern 37
- 3 Set up the optimizer 37
- Performing Auto Calibration 38
- 9 Disconnect the optimizer 39
- Customizing the Auto 40
- Calibration 40
- Using the menu 41
- 1 Press GUI MODE 42
- 3 Press TOOLS/OPTIONS while 42
- 2 +/– to adjust the volume 43
- Basic Operations 43
- 2 Press TOOLS/OPTIONS 44
- 3 Select “Name Input”, then 44
- 5 Repeat step 4 to input a 44
- Playing an iPhone/iPod 45
- To select the playback mode 46
- To operate the iPhone/iPod 47
- Notes on iPhone/iPod 47
- Playing a USB device 48
- 3 Press to select “USB” 49
- USB message list 50
- In case of poor FM stereo 51
- (Preset Tuning) 52
- Changing the AM tuning scale 52
- Selecting the sound field 54
- Music mode 55
- When headphones are 56
- Enjoying Surround Sound 57
- What is “BRAVIA” Sync? 59
- Preparing for the 59
- “BRAVIA” Sync 59
- Playing back equipment 60
- Enjoying the TV sound 61
- Turning off the receiver 61
- (Theater/Theatre Mode Sync) 62
- (Scene Select) 62
- (INPUT MODE) 62
- Other Operations 62
- HDMI input assign 64
- To exit the menu 65
- To operate the receiver from 65
- Making a zone 2 connection 66
- To exit the zone 2 operation 67
- Using the Settings menu 68
- Speaker Settings menu 69
- 1 Select the speaker on the 70
- Surround Settings menu 71
- EQ Settings menu 72
- Audio Settings menu 72
- HDMI Settings menu 73
- System Settings menu 74
- Operating without 74
- 1 Press AMP 75
- 2 Press MENU 75
- Overview of the menus 76
- Adjusting Settings 77
- Programming the remote 80
- 1 Press and hold RM SET UP 80
- 4 Press ENT/MEM 81
- To control a TV 83
- To control an LD player 83
- To control a Video CD player 83
- To control a VCR 84
- To control a cable box 84
- Resetting the remote 85
- 2 Release all buttons 85
- Precautions 85
- Troubleshooting 86
- 2 – on the 90
- Error messages 92
- Specifications 93
- B: 0.7 Vp-p, 75 ohms 94
- R: 0.7 Vp-p, 75 ohms 94
- Area Power requirements 95
- USA, Canada 95
- 120 V AC, 60 Hz 95
- DH820-CELIX.fm 96
Related products and manuals for AV receivers Sony STRDH820
AV receivers Sony STR-DK5 User Manual
(44 pages)
(44 pages)
AV receivers Sony STR-DE400 User Manual
(64 pages)
(64 pages)
AV receivers Sony HTP-36DW User Manual
(64 pages)
(64 pages)
AV receivers Sony STR-DE445 User Manual
(161 pages)
(161 pages)
AV receivers Sony HT-DDW99 User Manual
(80 pages)
(80 pages)
AV receivers Sony HT-SF2000 User Manual
(68 pages)
(68 pages)
AV receivers Sony STRDH800 User Manual
(124 pages)
(124 pages)
AV receivers Sony STR-DE675 User Manual
(111 pages)
(111 pages)
AV receivers Sony SA-VA15 User Manual
(16 pages)
(16 pages)
AV receivers Sony HT-SF1000 User Manual
(60 pages)
(60 pages)
AV receivers Sony STR-SL5 User Manual
(72 pages)
(72 pages)
AV receivers Sony HT-DDW890 User Manual
(80 pages)
(80 pages)
AV receivers Sony STR-DG710 User Manual
(80 pages)
(80 pages)
AV receivers Sony STR-DH710 User Manual
(100 pages)
(100 pages)
AV receivers Sony STRDN1020 User Manual
(132 pages)
(132 pages)
AV receivers Sony STR-DA2100ES User Manual
(68 pages)
(68 pages)
AV receivers Sony HT-DDW830 User Manual
(55 pages)
(55 pages)
AV receivers Sony STR-DN1010 User Manual
(136 pages)
(136 pages)
AV receivers Sony STR-DH720HP User Manual
(88 pages)
(88 pages)
AV receivers Sony HT-SS1000 User Manual
(60 pages)
(60 pages)
Panasonic KXTGA807EX manuali
Manuali dei proprietari e guide per l'utente per Telefoni Panasonic KXTGA807EX.
We fornisce 2 manuali pdf Panasonic KXTGA807EX per scaricare gratuitamente in base al tipo di documento: Istruzioni per gli Interventi
Comments to this Manuals