Sony STRDH820 User Manual Page 37

  • Download
  • Add to my manuals
  • Print
  • Page
    / 100
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 36
37
GB
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STR-
DH820-CEL.fm
masterpage: Right
STR-DH820
4-266-497-11(2)
Preparing the Receiver
Remove any obstacles in the path between
the optimizer microphone and the speakers
to avoid measurement errors.
Get accurate measurement by making sure
the environment is free from noise and quiet.
Notes
The speakers emit very loud sound during the
calibration and the volume cannot be adjusted.
Provide consideration to your neighborhood and to
the children in presence.
If the muting function has been activated before
you perform Auto Calibration, the muting function
will shut off automatically.
The correct measurements may not be able to take
or Auto Calibration cannot be performed when
special speakers, such as dipole speakers are used.
1 Select the speaker pattern
(page 34).
If you connect front high speakers, select
the speaker pattern that has front high
speakers (5/x.x or 4/x.x) each time
you perform Auto Calibration.
Otherwise, the characteristics of the front
high speakers cannot be measured.
2 Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack.
3 Set up the optimizer
microphone.
Place the optimizer microphone at your
seating position. Use a stool or tripod so
that the optimizer microphone remains at
the same height as your ears.
Confirm active subwoofer setup
When a subwoofer is connected, turn on the
subwoofer and turn up the volume prior to
activating the subwoofer. Turn the LEVEL
to just before the mid-point.
If you connect a subwoofer with a crossover
frequency function, set the value to
maximum.
If you connect a subwoofer with an auto
standby function, set it to off (deactivated).
Note
Depending on the characteristics of the subwoofer
you are using, the setup distance value may be
different from the actual position.
Setting up the Auto Calibration
Optimizer microphone
Example of using surround back
speakers
Page view 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 99 100

Comments to this Manuals

No comments