Sony STR-DA777ES User Manual download pdf (Page 51)

Receiving Broadcasts

Direct Tuning Using the

Remote

Use the supplied remote to perform the following

operations.

For details on the buttons used in this section, see the

operationg instructions for the supplied remote.

1 Touch FUNCTION and SUB on the remote to select

TUNER.

The last received station is tuned in.

2 Press FM/AM to select the FM or AM band.

3 Touch DIRECT on the remote.

4 Press the numeric buttons to enter the frequency.

Example 1: FM 102.50 MHz

Example 2: AM 1350 kHz

(You don’t have to enter the last “0” when the tuning scale is

set to 10 kHz.)

If you cannot tune in a station and the

entered numbers flash

Make sure you’ve entered the right frequency. If not,

repeat Steps 3 and 4.

If the entered numbers still flash, the frequency is not

used in your area.

5 If you’ve tuned in an AM station, adjust the

direction of the AM loop antenna for optimum

reception.

6 Repeat Steps 2 to 5 to receive another station.

If you try to enter a frequency that is too precise for the

tuning scale

The entered value is automatically rounded up or down.

531

05201

bbbb

Using the Tuner Menus

See “Automatic/Manual tuning” (page 49), “Preset

Tuning” (page 50) and “Direct Tuning Using the Remote”

(this page) for details.

p Tuning mode setting (TUNE MODE)

Initial setting : AUTO

To tune in receivable stations automatically, select

“AUTO”.

When you want to tune in a station that has a signal too

weak to be tuned in AUTO mode, select “MANUAL” to

change the frequency manually.

p FM mode (FM MODE)

Initial setting : STEREO

Normally, select “STEREO”. If FM stereo reception is

poor, select “MONO”. You will not be able to enjoy the

stereo effect, but the overall sound will be clearer.

p Naming preset stations (FM)

This setting lets you register a name of up to 8 characters

for the currently selected preset station. Touch

or to

move the position and turn the jog dial to select a

character. When you are finished entering the name, press

ENTER. When you want to clear a name that has been

registered, touch

or to make the 8 character boxes

blink. Turn the jog dial one click to the right to make the

name appear as 8 spaces and then press ENTER.

You can display the frequency of the station being received

Press TUNER, and then press repeatedly during reception of a

station that has a name registered.

p AM Tuning scale (AM X kHz –> Y kHz)*

Initial setting : NO

You can change the AM tuning scale. Press TUNER to

enter the tuner menu and press

or repeatedly to

display “AM X kHz n Y kHz”. Turn the jog dial to

display “YES” and press ENTER. When “Are you sure?”

appears in the display, turn the jog dial to select “YES”

and press ENTER again. When you change the AM tuning

scale, AM preset stations are cleared.

* Except for Singapore/Malaysia models.

p Clearing preset stations (PRESET CLEAR)

Initial setting : NO

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 63 64

Comments to this Manuals

No comments

Sony STR-DA777ES User Manual Page 51

Comments to this Manuals

Related products and manuals for AV receivers Sony STR-DA777ES