Sony PSLX300USB Specifications download pdf (Page 6)

PS-LX300USB.GB.3-198-123-15(1)

Carefully place the platter on the

spindle.

Use the ribbon to hook the drive belt

around the motor pulley.

Make sure not to twist the drive belt.

Aer looping the belt, do not forget to

remove the ribbon.

Place the rubber mat on the platter.

Turntable assembly is complete.

Note

When the AC power cord is plugged aer assembling or

moving the turntable, the turntable sometimes rotates

and the tone arm descends to the platter even if START

is not pressed.

If this occurs, press STOP to return the tone arm to the

arm stand.

To remove the dust cover

With the dust cover fully opened, grasp both

sides of the cover, then remove it carefully.

Tip

You can use the turntable leaving the dust cover removed.

In that case, store the cover correctly.

To install the dust cover

Insert the hinge pockets on the dust cover into

the hinges on the rear of the cabinet.

Hinge pocket

Hinge

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Sony PSLX300USB Specifications Page 6