Sony DTC-57ES User Manual download pdf (Page 32)

The end ID indicates the last position of the recording or

playback. While recording on the same tape has been done

several times, you can locate the point where the previous

recording terminates quickly, using the end ID.

When the end ID is detected during playback, the playback

stops and the tape is rewound to the beginning

automatically.

Writing during Recording

1 Press the llPAUSE, OREC MUTE or FADER button.

The button you pressed The mode of the deck

IIPAUSE

Record-pause mode

OREC MUTE

Record-pause mode after a

sound muted portion is

created for 4 seconds.

FADER Record-pause mode after

the sound fades out.

2 Press the END ID WRITE button.

The END ID WRITE indicator lights.

3 Press the iiPAUSE or ► (play) button to release the

record-pause mode.

The ’EE* indicator appears on the display.

The end ID is written for about 9 seconds (18 seconds in

the long-play mode). Tape returns to the beginning of the

end ID after the end ID is written.

PSMNO.

After you write an end ID

The portion after the end ID position cannot be played

back. (The *EE‘ indicator appears at the PGM NO. display.)

Erase the end ID (page 33) where you want to play back

the portion after the end ID position.

Writing during Playback (the Rehearsal Function)

a During playback, no end ID can be written on a blank

section.

• To write the end ID just before a blank section with the end

search function, perform *Writing during Recording*

described on the left colums.

• Make sure that the safety tab of the cassette is closed.

^ During playback, press END ID WRITE at the desired

position.

The REHEARSAL indicator lights and the WRITE indicator

flashes, and the portion for 3 seconds to the point where

you pressed the END ID WRITE button, is played back

repeatedly (rehearsal function).

The end of the repeated portion willbethe beginning of the

end ID.

2 Press the or ►► button to adjust the “repeat end”

point

The “repeat end point is shifted backward with the

button or fonward with the ►► button, by 0.3 of a second.

The indicator at the MARGIN display shows how much the

'repeat end* point is shifted from the point where you

pressed the END ID WRITE button.

It can be shifted up to 99 seconds backward or forward.

—I I

• — INPO

lo.d

When you pressed ^ twice

3 After setting the beginning of the end ID at the desired

point, press the END ID WRITE button again.

The *EE* and WRITE indicators light, and an end ID

is written.

Note on the point where an end ID Is written

During rehearsal function, an end ID is written at the end of

the repeated portion as illustrated.

Repeated portion —■

Selection o

3 seconds

Each time you press

0.3

Point where you pressed

END ID WRITE

Selection

■ End ID (9 seconds)

Each time you press ►►

0.3

The repeated portion is played back 8 times, and the tape

stops.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 48 49

Comments to this Manuals

No comments

Sony DTC-57ES User Manual Page 32

Comments to this Manuals

Related products and manuals for Voice Recorders Sony DTC-57ES