Sony DTC-57ES User Manual download pdf (Page 28)

Writing Manually during Recording

1 Make sure that the AUTO indicator is off. If it is not,

press the START ID AUTO button to turn it off.

2 To start recording, press the «REC button, then press

the iiPAUSE or ► (play) button.

3 At the desired position, press the START ID WRITE

button.

The WRITE indicator lights.

The start ID is written for 9 seconds (18 seconds in the

long-play mode) from the point where you pressed the

START ID WRITE button. While a start ID is being written,

the ISTART ID I indicator flashes.

Illustration of the rehearsal function

\ ✓

' ✓ N ^

I—START 10-

“wfMTfr-

Writing Manually during Playback

During playback, start ID can be written at the desired

position more accurately than during recording.

Make sure that the safety tab of the cassette is closed.

1 Press the ► button to start playback. At the desired

position, press the START ID WRITE button.

The REHEARSAL indicator lights and the WRITE and

ISTART ID I indicators flash, and the position for 3

seconds from the point where you pressed the START ID

WRITE button, is played back repeatedly (rehearsal

function). The beginning of the repeated portion will be

the beginning of the start ID.

2 Press the « or ►► button to adjust the “repeat start”

point.

The ‘repeat start* point is shifted backward with the

button or forward with the button by about 0.3 of a

second.

The indicator at the MARGIN display shows how much the

‘repeat start" point is shifted from the point where you

pressed the START ID WRITE button. It can be shifted up

to 99 seconds backward or fonward.

3 After setting the beginning of the start ID at thedesired

point, press the START ID WRITE button again.

The WRITE indicator lights steadily and the start ID is

written. The program number is not written in this time.

EL!

r”*-|

Point where you pressed

START ID WRITE ^

Selection

.Repeated portion

(for 3 seconds)

Selection

Each time you press -44 ■

0.3

Each time you press ^

0.3

The repeated portion is played back 8 times, and the taF>e

stops.

Adjusting the Position

To finely adjust the position of a start ID written

automatically during recording, use the rehearsal function

described on the left column.

You can shift the start ID position about 2 seconds (about 4

seconds in the long-play mode) backward or forward. To

shift it for more than 2 seconds, first erase the start ID (see

below) and rewrite it manually.

1 During playback, press the START ID WRITE button

where the start ID to be shifted is written.

2 Perforin steps 2 and 3 described on the ieft column,

“Writing Manuaiiy during Piayback.”

Erasing

While the start ID you want to erase appears on the

display during playback or In the stop mode, press the

START ID ERASE button. Make sure that the safety tab

of the cassette Is closed.

That start ID is erased.

The ERASE indicator flashes while the start ID is detected.

While the start ID is being erased, the ERASE indicator

lights and thelSTART lUlindicator flashes.

r—START«}—1

-CRAS^

If you press the START ID ERASE button during the

stop mode or while the I STARTIdI Indicator is not on

the display

The start ID just before the current position is erased.

When a start ID is erased

If a program number is also written with the start ID, both

codes will be erased at the same time.

When you pressed ►► twice

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 48 49

Comments to this Manuals

No comments

Sony DTC-57ES User Manual Page 28

Comments to this Manuals

Related products and manuals for Voice Recorders Sony DTC-57ES