Sony MHC-V21D User Manual download pdf (Page 72)

72

GB

MHC-V21D.GB.4-734-744-13(1)

••

BLUETOOTH devices and wireless LAN

(IEEE 802.11b/g/n) equipment use the

same frequency band (2.4GHz). When

using your BLUETOOTH device near

a device with wireless LAN capability,

electromagnetic interference may

occur. This could result in lower data

transfer rates, noise, or inability to

connect. If this happens, try the

following remedies:

— Use this system at least 10 meters

away from the wireless LAN

equipment.

— Turn off the power of the wireless

LAN equipment when using your

BLUETOOTH device within 10 meters.

— Use this system and BLUETOOTH

device as closer to each other as

possible.

••

The radio waves broadcast by this

system may interfere with the operation

of some medical devices. Since this

interference may result in malfunction,

always turn off the power on this

system and BLUETOOTH device in the

following locations:

— In hospitals, on trains, in airplanes,

at gas stations, and any place where

flammable gases may be present

— Near automatic doors or fire alarms

••

This system supports security

functions that comply with BLUETOOTH

specifications to ensure secure

connections during communication

using BLUETOOTH technology. However,

this security may be insufficient

depending on the setting contents

and other factors, so always be careful

when performing communication using

BLUETOOTH technology.

••

Sony cannot be held liable in any way

for damages or other loss resulting

from information leaks during

communication using BLUETOOTH

technology.

••

BLUETOOTH communication is not

necessarily guaranteed with all

BLUETOOTH devices that have the same

profile as this system.

••

BLUETOOTH devices connected with

this system must comply with the

BLUETOOTH specification prescribed

by the Bluetooth SIG, Inc., and must

be certified to comply. However, even

when a device complies with the

BLUETOOTH specification, there may

be cases where the characteristics or

specifications of the BLUETOOTH device

make it impossible to connect, or may

result in different control methods,

display or operation.

••

Noise may occur or the audio may

cut off depending on the BLUETOOTH

device connected with this system,

the communications environment, or

surrounding conditions.

Specifications

Speaker section

Speaker system:

2-way, Bass Reflex

Speaker unit:

Tweeter L/R: 66 mm, cone type

Woofer: 200 mm, cone type

Inputs

AUDIO/PARTY CHAIN IN (TV) L/R:

Voltage 2 V, impedance

47kilohms

TV (ARC):

Supported audio signal:

2-channel Linear PCM

MIC1:

Sensitivity 1 mV, impedance

10kilohms

MIC2/GUITAR:

Sensitivity 1 mV, impedance

10kilohms (When guitar mode is

turned off.)

Sensitivity 200 mV, impedance

250 kilohms (When guitar mode is

turned on.)

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 78 79 80

Comments to this Manuals

No comments