Sony IPT-DS1 Operations Instructions download pdf (Page 49)

13-GB

 Place the plate on the base with the multi connector through the hole.

The Sony logos on the main unit and plate should read in the same direction

when the plate is attached to the main body.

The plate and tilt arm have guide markers which should be aligned when

attaching.

On the plate:

Position marker A (

), position marker B ( )

On the tilt arm:

Position marker C (

)

When placing the plate on the tilt arm, align the marker A (

ˎ ) on the plate

with the marker C (

) on the tilt arm.

Position marker C ( )

Position marker A (

)

 Slide the plate until the marker B (

) on it is aligned with the marker C ( )

on the tilt arm.

Make sure that the plate is properly seated.

Position marker C ( )

Position marker B (

)

The plate clicks into place when inserted to the correct position.

If it is slightly raised, remove it and repeat the above steps to attach it.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 130 131

No comments

Sony IPT-DS1 Operations Instructions Page 49