Sony Water Dispenser 2 User Manual download pdf (Page 270)

Chapter 16 Engineering Setup

270

Setup Relating to DCU

To confirm the selected setting, press [GPI Output Set].

This confirms the selection, which is reflected in the status area.

Releasing the assignment of a GPI output port

Use the following procedure.

In the DCU>Output Config menu, select what the setting applies to (DCU1

or DCU2) from the <DCU Select> group.

In the <Parallel Output Assign> group, if [GPI Output] is on, press it to

turn it off.

Turn the knobs to select the slot and port to which the setting applies.

In the <Parallel Output Assign> group, press [No Assign].

GPI Output Setting (GPI Output Assign Menu)

To set the trigger type and so on for each GPI output, display the DCU>GPI

Output Assign menu.

To display the GPI Output Assign menu

In Engineering Setup, select VF5 ‘DCU’ and HF4 ‘GPI Output Assign.’

The GPI output port setting status appears in the status area.

Making DCU GPI output settings

Use the following procedure.

In the DCU>GPI Output Assign menu, using any of the following methods

select what the setting applies to.

• Press directly on the list appearing in the status area.

• Press the arrow keys to scroll the reverse video cursor.

• Turn the knob to make the setting.

Knob Parameter Adjustment Setting values

1 From Slot First port slot 2 to 6

2 From Port First port number 1 to 54

3 To Slot Last port slot 2 to 6

4 To Port Last port number 1 to 54

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 361 362

No comments

Sony Water Dispenser 2 User Manual Page 270