Sony STR-KS2300 User Manual download pdf (Page 42)

42

GB

x DUAL (Digital broadcast

language selection)

Lets you select the language you want to listen

to during digital broadcast. This feature only

functions for Dolby Digital sources.

• DUAL M (Main)

Sound of the main language will be output.

• DUAL S (Sub)

Sound of the sub language will be output.

• DUAL M/S (Main/Sub)

Sound of the main language will be output

through the front left speaker and sound of

the sub language will be output through the

front right speaker simultaneously.

• DUAL M+S (Main + Sub)

Mixed sound of both the main and sub

languages will be output.

x A.V. SYNC. (Synchronizes audio

with video output)

Lets you delay the audio output so that the

time gap between the audio output and visual

display is minimized. You can adjust from

0 (0 ms) to 20 (200 ms) in 1 (10 ms) steps.

Notes

• This parameter is useful when you use a large LCD

or plasma monitor or a projector.

• This function does not work when:

– signals with a sampling frequency of more than

48 kHz is input.

– the multi channel Linear PCM signals are

received via an HDMI IN jack.

x IN MODE (Switching the audio

input mode)

Lets you set the audio input mode of inputs.

For details, see “Switching between digital

and analog audio (IN MODE)” (page 60).

Settings for the video

(VIDEO menu)

You can use the VIDEO menu to make various

adjustments for HDMI settings.

Select “6-VIDEO” in the amplifier menus. For

details on adjusting the parameters, see

“Navigating through menus” (page 35) and

“Overview of the menus” (page 36).

VIDEO menu parameters

x AUDIO FOR HDMI (Audio for

HDMI)

Lets you set the audio output for HDMI from

the playback component connected to the

receiver via an HDMI connection.

•AMP

The HDMI audio signals from the playback

component is only output to speakers

connected to the receiver. Multi-channel

sound can be played back as it is.

Note

Audio signals are not output from the TV’s

speakers when “AUDIO FOR HDMI” is set to

“AMP”.

• TV+AMP

The sound is output from TV’s speaker and

the speakers connected to the receiver.

Notes

• The sound quality of the playback component

depends on the TV’s sound quality, such as the

number of channels, and the sampling

frequency, etc. When the TV has stereo

speakers, the sound output from the receiver is

also stereo as that of the TV, even if you play

multi-channel source.

• When you connect the receiver to a video

component (projector, etc.), sound may not be

output from the receiver. In this case, select

“AMP”.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 75 76

Comments to this Manuals

No comments