Sony STR-GX700ES User Manual download pdf (Page 6)

Hookups

This section describes how to hookup antennas, audio components, TV/VCRs, speaker

systems, and external amplifiers.

Notes

• Do not connect the power cord to an AC outlet nor press

the POWER switch before completing all other hookups.

• Be sure to fully insert the cable connectors into the jacks.

Loose connection may cause hum and noise.

• Jacks and plugs of the connecting cord are color-coded as

follows:

Red jacks and plugs: For right channel audio

White jacks and plugs: For left channel audio

Yellow jacks and plugs: For video

Connecting an FM Antenna

Connect the supplied FM wire antenna for temporary use.

For better sound reception, we recommend that you use a

75-ohm coaxial cable (not supplied) instead.

Connecting an AM Antenna

Connect the supplied AM loop antenna to the AM antenna

terminal, as shown below:

If you have poor AM reception

Usually, the supplied AM loop antenna is adequate to

receive AM broadcasts.

If you have poor reception, connect a 20 to 50 ft. (6 to 15-

meter) insulated wire to the AM antenna terminal in

addition to the loop antenna. If possible, extend the wire out

of doors and keep it horizontal.

(Do not remove the AM loop antenna.)

To prevent hum

If you install an outdoor antenna, connect the ground wire to

the ANTENNA ground terminal (/h) for lightning protection.

1 2 3 4 5 6 7 8 9 10 11 ... 38 39

No comments

Sony STR-GX700ES User Manual Page 6