Sony GVM-1311Q User Manual download pdf (Page 7)

] RGB A interface unit

16, 64 COLOR/8 COLOR selector

Press this selector (a) when digital RGB equipment

having 16- or 64-color mode is connected to the RGB A

connector. The 16- or 64-color mode is automatically

selected by sync polarity. Keep the selector released

(Q) for digital RGB equipment having the 8-color mode.

DIGITAL/ANALOG selector

Press this selector (q) when video equipment having

digital RGB output is connected to the RGB A

connector. Release the selector (n) for equipment

having analog RGB output.

RGB A connector (D-sub 9-pin, female)

Connect to video equipment having either digital or

analog RGB output.

To monitor the input signal fed through this connector,

press the RGB A input select button.

I SUPERIMPOSE switch

Set this switch to ON (j=.) to display the composite video

signal from a laser disc player, etc., or to perform

superimposition. In this case, the RGB H/V SHIFT, RGB

H/V SIZE and RGB PICTURE controls do not function.

Set this switch to OFF (n) to display the RGB signal

from a microcomputer, etc. In this case, the sync signal

should be supplied to pin 3 (H. sync) or pin 11 (V. sync)

of the RGB B connector.

> When the RGB B/NORMAL mode select signal is

supplied to pin 10 of the RGB B connector with the

SUPERIMPOSE switch set to ON, the previously

selected LINE A or LINE B indicator lights together

with the RGB B indicator.

> Synchronize the line signal of the video equipment that

is superimposing with the signal of RGB equipment.

] RGB A AUDIO input jack (phono type)

Connect to the audio outputs of the RGB equipment

connected to the RGB A connector.

] RGB A SELECT connector (minijack)

When ground potential is applied to this connector,

signal input from the RGB A connector will be monitored

regardless of the setting of the input select buttons on

the front panel. If a power supply of 5 V is applied to the

connector or the circuit is open, the input signal selected

with the input select buttons will be monitored.

This connector allows the input source monitored to be

selected with external equipment.

] CONTROL S input connector (minijack)

Connect to the CONTROL S output of video equipment.

The power on/off, input select, volume and picture

settings can be remotely controlled through the

equipment connected.

Mutual interference of deflection may occur when

several monitors are ranged side by side for a loop-

through connection, as this unit is compatible with the

signals of high horizontal frequencies. In such a

situation, allow adequate space between each unit.

Earphone jacks

Phone 1 :When the earphone is connected,

the sound through the speaker is

also audible.

Phone 2 (Switched) :When the earphone is connected,

the sound through the speaker is

not audible.

If a stereo headphone plug is inserted to Phone 1 or Phone

2, the monaural sound will be heard from both the left and

right channels.

I RGB B connector (D-sub 25-pin, male)

Connect to video equipment having either digital or

analog RGB output.

To monitor the input signal fed through this connector,

press the RGB B input select button.

If you do not attach the ferrite core on the shielded RGB cable,

the monitor will not conform to mandatory FCC standards.

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Sony GVM-1311Q User Manual Page 7

Comments to this Manuals

Related products and manuals for Monitors Sony GVM-1311Q