Sony KLV-40WE5 User Manual download pdf (Page 32)

\SONY

STM\S

ony

STM

2009

S6\JC09

xxxx_

4137539113

S6 GB Rev\4137539113\080MEN.fm

mas

erpage:

KLV-46/40/32W550A/40WE5

4-137-539-11(3)

Manual Programme

Preset

To preset a channel, press PROG +/– to select the programme number, before

selecting “Label”, “AFT”, “Audio Filter”, “Skip”, “Signal Booster” or “Colour

System”. You cannot select a programme number that is set to “Skip” (page 32).

Programme/

TV System/

Frequency

Presets programme channels manually.

1 Press F/f to select “Programme”, then press .

2 Press F/f to select the programme number you want to

manually tune (if tuning a VCR, select programme 0),

then press .

3 Press F/f to select “TV System”, then press .

4 Press F/f to select the best received TV broadcast

systems, then press .

5 Press F/f to select “Frequency”, then press .

6 Press G/g to search for the next available channel. The

frequency band (“VHF Low”, “VHF High” or “UHF”)

is changed accordingly.

Label Assigns a name of your choice to the selected channel. This

name appears briefly on the screen when you select the

channel.

To input characters, follow steps 2 to 4 in “Programme

Labels” (page 31).

AFT Allows you to fine-tune the selected channel manually if you

feel that a slight tuning adjustment may improve picture

quality.

When “On” is selected, fine tuning adjustments are made

automatically.

Audio Filter Improves the sound of individual channels when distortion

occurs in mono broadcasts in TV system “B/G”, “I” and

“D/K”.

• You cannot receive stereo or dual sound when “Low” or

“High” is selected.

Skip Skips unused channels when you press PROG +/– to select

channels. To select channels you have programmed to skip,

use the corresponding number buttons.

Signal Booster Improves the picture quality if the TV signal is too strong or

weak. Press F/f to select either “Off” if the signal is too

strong (picture distorted; picture with lines; signal

interference) or “Auto” if the signal is weak (snowy picture),

then press .

Colour System Selects the colour system (“Auto”, “PAL”, “SECAM”,

“NTSC3.58” or “NTSC4.43”) according to the channel.

Signal Level Displays the signal level for programme currently being

watched.

010COV.book Page 32 Friday, May 29, 2009 1:59 PM

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Sony KLV-40WE5 User Manual Page 32

Comments to this Manuals