Sony PCG-R505GCP User Manual download pdf (Page 65)

Printing With Your Computer

❑ You may need to install the printer driver software before you use the printer.

See the instructions that came with your printer for information about

installing these drivers.

❑ If the printer is not functioning after the computer resumes from a power

saving mode (Standby or Hibernate), reset the printer connection.

1 Click Start, and click Control Panel.

2 Click Printers and Other Hardware, and click Printers and Faxes.

3 Right-click the printer icon that is not functioning, and select Properties

to open the Properties window.

4 Click OK.

❑ Change the default printer port setting, although this setting is generally

correct for most printers.

1 Click Start, and click Control Panel.

2 Click Performance and Maintenance, and click System. The System

Properties dialog box appears.

3 Select the Hardware tab, and click Device Manager. The Device

Manager window appears.

4 Double-click Ports (COM&LPT), and double-click ECP Printer Port

(LPT1).

5 Select the Port Settings tab, and select a different LPT Port Number.

❑ You may need to enable the computer’s printer settings.

1 Click Start, and point to All Programs, Sony Notebook Setup, and

click Sony Notebook Setup again.

2 Click the Device tab.

3 In the left panel, make sure the Printer Port check box is selected, and

click Setting.

4 In the Printer port mode box, click the ECP option.

5 Click OK.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 195 196

No comments

Sony PCG-R505GCP User Manual Page 65