Sony DAV-HDX285 User Manual download pdf (Page 34)

34

GB

Getting Started

8 Press C/c to select the speaker

formation image as the speakers are

actually positioned, then press .

For details, see “Getting Optimal Surround

Sound for a Room” (page 80).

9 Connect the calibration mic (supplied)

to the A.CAL MIC jack on the front

panel.

Set up the calibration mic at ear level using

a tripod, etc. (not supplied).

The front of each speaker should face the

calibration mic, and there should be no

obstruction between the speakers and the

calibration mic.

10 Press C/c to select [YES], then press

.

[AUTO CALIBRATION] starts.

Be quiet during the measurement.

Note

• Loud test sounds are output when [AUTO

CALIBRATION] starts. You cannot turn the

volume down. Give consideration to children

and neighbors.

• Before [AUTO CALIBRATION], install the

surround amplifier in the appropriate location. If

you install the surround amplifier in an improper

location, such as another room, proper

measurement will not be obtained.

• The environment of the room in which the

system is installed may affect measurements.

When the measurements differ considerably

from the status of the speaker installation,

perform the speaker settings manually by

following “Settings for the speakers” (page 64).

11 Unplug the calibration mic, press C/c

to select [YES], then press .

Quick Setup is finished. All connections

and setup operations are complete.

To quit the Quick Setup

Press DISPLAY in any Step.

To recall the Quick Setup display

1 Press FUNCTION +/– repeatedly until

“DVD” appears in the front panel

display.

2 Press DISPLAY while the system is

in stop mode.

The Control Menu display appears on the

TV screen.

3 Press X/x to select [SETUP],

then press .

The options for [SETUP] appear.

4 Press X/x to select [QUICK], then press

.

The Quick Setup display appears.

Calibration mic

94( 99)

CUSTOM

CUSTOM

DVD VIDEO

T 0: 01: 08

1( 1)

QUICK

1 ... 33 34 35 ... 116

Comments to this Manuals

No comments