Sony MHC-WZ7AV User Manual download pdf (Page 39)

Troubleshooting

The album title, track title, ID3 tag, and the

CD-TEXT characters do not appear correctly.

• Use a disc that conforms with ISO9660 level 1,

level 2, or Joliet in the expansion format.

• The disc ID3 tag is not ver. 1.

• The characters that can be displayed by this unit

are as follows:

– Upper cases (A to Z)

– Lower cases (a to z)

– Numbers (0 to 9)

– Symbols (< > * + , – / _, etc.)

Other characters may not be displayed correctly.

Tuner

Severe hum or noise/stations cannot be

received.

• Set the proper band and frequency (page 18).

• Connect the antenna properly (page 7).

• Find a place and an orientation that provide good

reception, then set up the antenna again. If you

cannot obtain good reception, we recommend you

connect a commercially available external

antenna.

• The supplied FM lead antenna receives signals

along its entire length, so make sure you extend it

fully.

• Locate the antennas as far away from the speaker

cords as possible.

• Consult your nearest Sony dealer if the supplied

AM antenna has come off the plastic stand.

• Try turning off surrounding electrical equipment.

• Set “CD POWER OFF” by CD power manage

function (page 19).

A stereo FM program cannot be received in

stereo.

• Press FM MODE until “MONO” disappears.

Tape deck

The tape does not record or play, or there is a

decrease in sound level.

• The heads are dirty. Clean them (page 42).

• The record/playback heads are magnetised.

Demagnetise them (page 42).

The tape does not erase completely.

• The record/playback heads are magnetised.

Demagnetise them (page 42).

There is excessive wow or flutter, or the sound

drops out.

• The capstans or pinch rollers are dirty. Clean them

(page 42).

Noise increases or the high frequencies are

erased.

• The record/playback heads are magnetised.

Demagnetise them (page 42).

The tape does not record.

• No cassette is loaded. Load a cassette.

• The tab has been removed from the cassette.

Cover the broken tab with adhesive tape

(page 42).

• The tape has wound to the end.

After pressing nN, there is a mechanical

noise, “Eject” appears in the display, and the

system enters standby mode automatically.

• Insert the cassette correctly.

If the system still does not

operate properly after performing

the above measures, reset the

system as follows:

Use buttons on the CD player for the operation.

1 Disconnect the power cord.

2 Reconnect the power cord.

3 Press x, EQ EDIT and ?/1 at the same

time.

4 Press ?/1 to turn on the system.

The system is reset to the factory settings. You

should set the settings you made, such as the

preset stations, clock, and timer.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Comments to this Manuals

No comments

Sony MHC-WZ7AV User Manual Page 39

Comments to this Manuals

Related products and manuals for Home audio sets Sony MHC-WZ7AV