Sony DHG-HDD250 User Manual download pdf (Page 4)

Instructions for Use of Demo Mode:

DHG-HDD250 / DHG-HDD500

Sony Electronics, Inc.

Page 4 of 8

2 Optional First Steps

2.1 Checking the Format

When the HD DVR is first powered on, the Auto Setup Welcome screen will

automatically appear. If you do not see the below Welcome screen on your TV:

1. Check the connections from the HD DVR to the TV

2. Check that the correct Format setting for your TV has

been selected. Repeatedly press the FORMAT button

on the remote control or front panel until a format

setting that is compatible with your TV is displayed on

the front panel (such as “1080”, “720p”, “SD OUT”,

etc.) and the below image appears.

2.2 Completing or Skipping the Auto Setup

If the HD DVR will be used to receive cable or antenna services, follow the on-screen

instructions of the Auto Setup and TV Guide

® Setup.

If the HD DVR will only be used to play the pre-recorded content (such as in a retail

environment with no available cable or antenna connection), you may follow these

steps to skip the Auto Setup and TV Guide Setup.

1. While the above screen is displayed, press the

SCREEN MODE button on the remote control.

2. Enter the numbers “1”, “1”, “2”, “0”.

1 2 3 4 5 6 7 8

No comments

Sony DHG-HDD250 User Manual Page 4