Sony Projector VPL-SW125 User Manual download pdf (Page 21)

The SET SETTING Menu

Adjustments and Settings Using a Menu

The SET SETTING Menu

The SET SETTING menu is used for setting various functions of the projector.

Items Item descriptions

Smart APA On/Off: When set to “On,” executes APA automatically when a signal

is input.

*1 *2

Auto Input Search On/Off: When set to “On,” the projector detects input signals in the

following order: Input-A/Input-B/Video/S Video. It indicates the input

channel when the power is turned on or the INPUT key is pressed.

Input-A Signal Sel. Auto/Computer/Component/Video GBR: When set to “Auto,”

selects the type of video signal input automatically when “Input-A” is

selected with the INPUT key.

Color System Auto/NTSC3.58/PAL/PAL-60/SECAM/NTSC4.43/PAL-M/PAL-N:

When set to “Auto,” selects the color system automatically when “S

Video” or “Video” is selected with the INPUT key.

Power Saving Mode Lamp Cutoff: The lamp turns off automatically and power

consumption is reduced if no signal is input for 10 minutes. The lamp

lights again when a signal is input or any key is pressed. In Lamp

Cutoff, the ?/1 key lights in orange (page 30).

Standby: The power will be turned off automatically and the projector

goes to Standby mode if no signal is input for 10 minutes.

Off: The Power Saving Mode is canceled.

Panel Key Lock On/Off: When set to “On,” locks all the control panel keys of the

projector. However, you can operate the following when set to “On”:

• Press and hold the ?/1 key for approximately 10 seconds during

Standby mode.

c The projector turns on.

• Press and hold the ?/1 key for approximately 10 seconds during

power on.

c The projector goes to Standby mode.

• Press and hold the MENU key for approximately 10 seconds during

power on.

c “Panel Key Lock” is set to “Off” and enables operation of all keys

on the projector.

CC Display CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed

caption service (Captions or Text).

Off: Closed caption does not appear.

Network Setting

IP Address Setup Auto (DHCP): The IP address is assigned automatically from the

DHCP server such as a router.

Manual: To specify the IP Address manually.

IP Address/Subnet

Mask/Default

Gateway/DNS

Server/Apply

When “Manual” is selected for “IP Address Setup,” select the item

with the B or b key and input the value with V or v key. When all

items are entered, select “Apply” then press the ENTER key. The

entered settings will be registered.

Lamp Timer Reset When replacing the lamp, resets the lamp timer (page 34).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 49 50

Comments to this Manuals

No comments

Sony Projector VPL-SW125 User Manual Page 21

Comments to this Manuals

Related products and manuals for Data projectors Sony Projector VPL-SW125