Sony Projector VPL-SW125 User Manual download pdf (Page 13)

Projecting an Image

Projecting/Adjusting an Image

Changing the aspect ratio of the projected image

Press ASPECT on the remote commander to change the aspect ratio of the projected image.

You can also change the setting in Aspect of the INPUT SETTING menu (page 17, page 19).

Correcting trapezoidal distortion of the projected image (Keystone feature)

Keystone feature may not work automatically when the screen is tilted. In this case, set

keystone manually.

1 Press KEYSTONE on the remote

commander or select V Keystone in the

INSTALL SETTING menu.

2 Use V/v/B/b to set the value. The higher

the setting, narrower the top of the

projected image. The lower the setting, the

narrower the bottom.

Since the Keystone adjustment is an electronic

correction, the image may be deteriorated.

Automatically adjusts Phase, Pitch and Shift of projected image while a

signal is input from a computer (APA (Auto Pixel Alignment))

Press APA on the remote commander. Press again to cancel during the setting.

If Smart APA is set to On, executes APA automatically when a signal is input (page 21).

Note

Increase the number

towards plus

Increase the number

towards minus

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 49 50

No comments

Sony Projector VPL-SW125 User Manual Page 13