Sony PCV-E314DS User Manual download pdf (Page 641)

100

101

You do not need to completely remove the diskette drive in order to access the DIMM sockets.

If necessary, remove any cables, add-in cards, or other components to access the DIMM

sockets.

Remove either (or both) of the factory-installed DIMMs.

Handle the DIMM only by the edges, and remove it from its anti-static package.

Locate the keys on the bottom edge of the DIMM .

Align the DIMM over the socket.

To avoid damaging the DIMM socket, move the DIMM socket tabs slightly outward to relieve pressure. The

DIMM should then click easily into place.

Firmly insert the bottom edge of the DIMM into the socket.

10.

Press evenly against the DIMM's upper corners. The end latches snap into position automatically.

11.

Reinstall any add-in cards or components you removed.

12.

Replace the diskette drive and cover panels, as described in Replacing the Diskette Drive to

Replacing the Left-Side Panel.

Replacing the Lithium Battery

After several years, when the lithium battery starts to weaken, the system settings stored in CMOS

RAM, such as the date and time, may be wrong. When this occurs, you need to replace the lithium

battery.

To replace the lithium battery

To run the Setup utility, press F3 when your computer is starting up. Then press F1 to run the

BIOS setup utility.

Page 641

1 2 ... 636 637 638 639 640 641 642 643 644 645 646 ... 854 855

Comments to this Manuals

No comments

Sony PCV-E314DS User Manual Page 641

Comments to this Manuals

Related products and manuals for Computers Sony PCV-E314DS