Sony PCV-RX550 User Manual download pdf (Page 48)

VAIO Digital Studio System Reference Manual

10 Carefully but firmly insert the edge of the module into the socket.

11 Press down firmly and evenly at both corners until the module is

fully seated.

12 Replace the AGP card and secure using the screw removed earlier.

13 Replace the power supply (see “Replacing the Power Supply” on

page 45).

14 Replace the side cover (see “Replacing the Side Cover” on page 25).

15 Reconnect the power cord and turn on the computer.

Your computer automatically recognizes the extra memory and

configures itself accordingly when you turn on the computer. No further

action is required.

✍ When the module is fully seated, the handles on each side are straight up and

locked into the slot on each side of the module. If the handles are not totally

straight upright, continue to press down on each side of the module until the

handles lock into place.

✍ Be sure to press down firmly until the handle on the AGP slot is straight up and

locked into the slot on the AGP card.

Latch

Edge Connectors

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 93 94

No comments

Sony PCV-RX550 User Manual Page 48