Sony CHC-TB20 User Manual download pdf (Page 15)

Tuner

Listening to the radio

You can listen to a radio station either by

selecting a preset station, or by manually tuning

in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first

(see “Presetting radio stations” on page 13).

1 Press TUNER/BAND repeatedly to

select “FM” or “AM”.

2 Press PLAY MODE/TUNING MODE until

“PRESET” appears.

3 Slide the knob to l or to L (or

press . or > on the remote) to

select the desired preset station (or

station name* or RDS station name**).

* The station name appears only if you have

labeled the station (see “Labeling the preset

stations” on page 16).

**European model only.

Listening to a non-preset

radio station

— Manual Tuning

1 Press TUNER/BAND repeatedly to

select “FM” or “AM”.

2 Press PLAY MODE/TUNING MODE until

“PRESET” and “AUTO” disappear.

3 Slide the knob to m or to M (or

press m or M on the remote) to tune

in the desired station.

continued

Tuner

To change the AM tuning interval

(except for the European model)

The AM tuning interval is factory-set to 9 kHz

(10 kHz in some areas). To change the AM

tuning interval, tune in any AM station first,

then turn off the system. While holding

REPEAT/FM MODE, turn the system back on.

When you change the interval, all the AM

preset stations are erased. To reset the interval,

repeat the same procedure.

Note

You cannot change the AM tuning interval in the

Power Saving Mode.

Tips

• The preset stations are retained for about a day even

if you disconnect the power cord or if a power

failure occurs.

• You can label the preset stations (see page 16).

• To improve broadcast reception, reorient or move

the supplied antennas near a window or outdoors.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comments to this Manuals

No comments

Sony CHC-TB20 User Manual Page 15

Comments to this Manuals

Related products and manuals for CD players Sony CHC-TB20