Sony CDX-C910RDS User Manual download pdf (Page 11)

Actual total number: Sony CDX-C910RDS (E,F,G) 3-856-717-11(2)

Listening to a regional programme

The “REG on” (regional on) function of this

unit lets you stay tuned to a regional

programme without being switched to another

regional station. (Note that you must turn the

AF function on.) The unit is factory preset to

“REG on”, but if you want to turn off the

function, do the following.

1 Press (SHIFT), then press (3) (P.MODE)

repeatedly until “REG” appears.

2 Press (4) (n) repeatedly until “REG off”

appears.

3 Press (SHIFT).

Note that selecting “REG off” might cause

the unit to switch to another regional

station within the same network.

To go back to the regional on, select “REG on”

in step 2 above.

Note

This function does not work in the United Kingdom and in

some other areas.

Local link function (United

Kingdom only)

The Local Link function lets you select other

local stations in the area, even though they are

not stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even though you are

listening to other programme sources.

RDS

Press (AF/TA) repeatedly until “TA on” or

“AF TA on” appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are listening

to another programme source, the unit automatically

switches to the announcement and goes back to the original

source when the announcement is over.

Notes

• “NO TP” flashes for five seconds if the received station

does not broadcast traffic announcements. Then, the unit

starts searching for a station that broadcasts traffic

announcements.

• When “EON” appears with “TP” in the display, the

current station makes use of broadcast traffic

announcement of other stations in the same network.

To cancel the current traffic

announcement

Press (AF/TA) momentarily.

To cancel all traffic announcements, turn off

the function by pressing (AF/TA) until

“AF TA off” appears.

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t miss

the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (AF/TA) for two seconds.

A beep sounds and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will be automatically switched to the

announcement. If you are listening to a source

other than the radio, the emergency

announcements will be heard if you set AF or

TA to on. The unit will then automatically

switch to these announcements no matter what

you are listening to at the time.

1 ... 10 11 12 ... 107

Comments to this Manuals

No comments

Sony CDX-C910RDS User Manual Page 11

Comments to this Manuals

Related products and manuals for CD players Sony CDX-C910RDS