Play
Compact Disc
Compact Player
Playing a CD right
away!
If you want to play a CD right now, choose to use your player on house
current. Other choices are the following three: rechargeable battery, dry
batteries (see “Power Sources” on the reverse side) and car battery.
Connect
Sony Corporation ©1998
3
1
to a wall
outlet
AC power adaptor
DC IN 4.5 V
1Slide OPEN to open the lid.
OPEN
Welcome!
Thank you for purchasing the Sony
Compact Disc Compact Player.
Before operating your player, please
read this manual and retain it for
future reference.
WARNING
To prevent fire or shock
hazard, do not expose
the unit to rain or
moisture.
To avoid electrical
shock, do not open the
cabinet. Refer servicing
to qualified personnel
only.
CAUTION
The use of optical instruments with this product
will increase eye hazard.
2/REMOTE
For models supplied with the AC plug adaptor
If the AC power adaptor does not fit the wall outlet, use the AC plug adaptor.
For models supplied with the remote control
•Connect the plug of the earphones to the remote control.
•Connect the earphones to the remote control firmly. A loose connection may cause noise
during playback.
Place a CD
2
2 Adjust the volume.
1 Press the jog
lever toward
^.
To stop play, press p.
To use the player
1 Press ^.
2 Adjust the volume.
Operating Instructions
About area code
The area code of the player you purchased is shown on upper left of the bar
code label on the package.
For accessories supplied with your player, check the area code of your model
and refer to “Supplied accessories” toward the end of this manual.
3-864-733-21 (1)
D-E554
zOther Operations
Playing tracks repeatedly
(Repeat Play)
You can play tracks repeatedly in normal,
INTRO PGM, shuffle or RMS (Random Music
Sensor) play modes. Repeat all the tracks or
only one track.
To repeat all the tracks
Press RPT/ENT (REPEAT/ENTER on the
player) during play.
The “ ” indication appears.
To cancel repeat play, press RPT/ENT again.
To repeat a single track
1 Press RPT/ENT while the track you want
to repeat is playing.
The “ ” indication appears.
2 Press P (play) MODE (PLAY MODE on the
player) repeatedly until “1” appears.
To repeat another track, slide the jog lever
toward = or + .
To cancel repeat play, press RPT/ENT again.
Playing only the tracks
you want
(INTRO PGM Play)
You can choose and play your favorite tracks
by scanning through the beginning of each
track in a CD.
1 During play, press P MODE repeatedly
until “INTRO PGM” flashes.
2 Press the jog lever toward ^ to start
scanning.
The player plays about the first 15
seconds of each track and “INTRO PGM”
flashes faster.
3 Press RPT/ENT while the track you want
is playing. To skip the track, slide the jog
lever toward + or just wait for the next
track.
After you have gone through the CD,
“INTRO PGM” stops flashing and the tracks
you have chosen play automatically.
To finish programming before going through
the whole CD, press the jog lever toward ^.
The selected tracks will be played.
If you press p, the program will be erased.
To prevent accidental erasure, set the
RESUME switch at the rear of the player to
ON.
To cancel INTRO PGM play, press P MODE
repeatedly until the play mode indication
disappears from the display.
Using other functions
To minimize skipping (ESP
2
)
The ESP (Electronic Shock Protection)
function minimize skipping by using a buffer
memory that stores music data and plays it
back in the event of a shock.
The new ESP
2
(ESP Squared) system uses a
new DSP (Digital Signal Processor) which can
read and store music data more efficiently,
providing a level of continuous skip
protection not found in traditional buffer
memory units. This decreases the frequency
of sound skipping and the need to utilize the
buffer memory. Use this function when
listening in a car or while walking.*
* Although ESP
2
provides excellent protection
against skipping, it will not prevent skipping
while jogging or running.
Press ESP.
The ESP indication appears.
To release the ESP function, press ESP again.
Notes
• Playing may stop when the player gets a strong
shock even with the ESP function on.
• You may hear a noise or sound skip when:
— listening to a dirty or scratched CD,
— listening to an audio test CD or,
— the player receives continuous shock.
• Sound may drop for a while if you press ESP
during play.
• When you use an optical digital connecting
cord, the ESP function will be disabled.
To enjoy more powerful bass sound
(Sound function)
You can enjoy a powerful bass-boosted sound.
Press SOUND to select “MB (Mega Bass)” or
“GRV (Groove).” “GRV” is more effective.
Note
• If the sound is distorted when emphasizing
bass, turn down the volume.
To lock the buttons
You can lock your player against any
accidental operations.
You can still operate the player with the
remote control.
Slide HOLD in the direction of the arrow.
When you press any button, “Hold” appears in
the display and you cannot operate the player.
To unlock, slide HOLD back.
Playing tracks in random
order
(Shuffle Play)
You can play the tracks in a CD in random
order.
During play, press P MODE repeatedly until
“SHUF” appears.
The tracks play in random order.
To cancel shuffle play, press P MODE
repeatedly until the play mode indication
disappears from the display.
Note
• During shuffle play, you cannot return to
previous tracks by sliding the jog lever toward
= .
Playing tracks in the order
you want
(RMS play)
You can program up to 22 tracks to play in
any order you choose.
1 During play, press P MODE repeatedly
until “RMS*” flashes.
*RMS = Random Music Sensor
2 Slide the jog lever toward = or + to
choose a track.
The track number and the playing order
appear.
3 Press RPT/ENT to program the track.
4 Repeat steps 2 and 3 to program the
remaining tracks.
5 Press the jog lever toward ^ .
“RMS” stops flashing and the tracks you
have chosen play in the order you
specified.
If you press p, the program will be erased. To
prevent accidental erasure, set the RESUME
switch at the rear of the player to ON.
To cancel RMS play, press P MODE until
“RMS” disappears from the display.
To check the program
During programming:
Press RPT/ENT before step 5.
During RMS play:
Press P MODE repeatedly until “RMS”
flashes, then press RPT/ENT.
Each time you press RPT/ENT, the track
number and the playing order appear in the
order you specified.
Note
• If you program another track after the 22nd
track, the first track programed is cleared and
the new track is programed instead.
^
Flashing
P MODE
Flashing
Playing order
Track number
Flashing
Not these ways
P MODE
RPT/ENT
+
RPT/ENT
Do this
Press the jog lever
toward ^.
Press the jog lever
toward ^.
Slide the jog lever
toward =
once.**
Slide the jog lever
toward
=
repeatedly.**
Slide the jog lever
toward +
once.**
Slide the jog lever
toward
+
repeatedly.**
Slide and hold the
jog lever toward
+.**
Slide and hold the
jog lever toward
=.**
*AMS = Automatic Music Sensor
**These operations are possible during both
play and pause.
If you press RPT/ENT (REPEAT/ENTER on
the player) to display “ ”, you can locate the
tracks continuously in the following order:
•When using +: next track n next track
...... last track n first track n second track
......
•When using =: previous track n previous
track ...... first track n last track ......
You can do the operations shown in the above
table using the buttons with the same marks
on the player.
To remove the CD
Remove the CD while
pressing the pivot.
Notes on controlling the volume with the
remote control
Set the VOL (volume) control on the remote
control to the maximum. Then adjust the
volume on the player to the level that you
want to be the maximum volume of the remote
control.
Notes on display
•When you press ^ (when RESUME is set to
OFF), the total number of tracks in the CD
and the total playing time appear for about 2
seconds.
•During play, the track number and the
elapsed playing time of the current track
appear.
•During pause, the elapsed playing time
flashes in the display.
•Between tracks, the time to the beginning of
the next track will appear with the “–”
indication.
Notes on handling CDs
•To keep the CD clean, handle it by its edge.
Do not touch the surface.
•Do not stick paper or tape onto the CD.
•Do not expose the CD to direct sunlight or
heat sources such as hot air ducts. Do not
leave the CD in a car parked under direct
sunlight.
To
Pause
Resume play after
pause
Find the beginning
of the current track
(AMS*)
Find the beginning
of previous tracks
(AMS)
Find the beginning
of the next track
(AMS)
Find the beginning
of succeeding
tracks (AMS)
Go forward
quickly
Go backwards
quickly
P MODE
2Fit the CD to the pivot.
3Close the lid.
ESP
SOUND
Continue to the reverse side m
Earphones
When using
earphones
To use the remote control
The lever marked with =-^-+ is the
jog lever. When you press or slide the lever,
operation starts.
Label side up
Press
SlideSlide
^
+
=
=
p
^
+
RPT/ENT
P MODE
=
p
For the customers not in Poland
The mark on the unit is valid only for
products marketed in Poland.
For the customers not in Europe
The CE mark on the unit is valid
only for products marketed in the
European Union.
For the customers not in Russia
The mark on the unit and package
is valid only for products marketed
in Russia.
Comments to this Manuals