Sony XAV-77 User Manual download pdf (Page 47)

If movement of the monitor

has been impeded during the

monitor setting

If movement of the monitor during opening

or closing has been impeded by the gear shift

lever or another obstacle, follow the steps

below to set again.

Set the ignition key of the car to

OFF.

Take off obstacle .

Press the bottom of the monitor

frames to tilt the monitor forward.

Do not touch or press the remote sensor or

monitor display.

Tip

To tilt the monitor forward smoothly, press the

designated position by your thumbs of both hands

while putting your forefingers at the back side of

the monitor.

Set the ignition key to ON and

press the Reset button on the unit.

(See “Resetting the unit” on page 6.)

Note

When the Reset button is pushed, the memorized angle

is reset to the status of your purchase.

Dismounting the unit

Hold down OFF until the display

disappears.

Insert the supplied tool between

the unit and the frame, and rotate

90° to release the hidden

mounting spring. Repeat on the

opposite side and remove the

frame.

10 mm

90°

continue to next page t

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 103 104

No comments

Sony XAV-77 User Manual Page 47