Sony MEX-BT3000 User Manual download pdf (Page 21)

21

*1 When EQ3 is activated (page 21).

*2 When the audio output is set to “SUB-OUT”

(page 22).

“ATT” is displayed at the lowest setting, and

can be adjusted up to 21 steps.

*3 When AUX source is activated (page 23).

*4 When Bluetooth audio source is activated.

Selecting the sound quality

— EQ3 Preset

You can select an equalizer curve from 7

equalizer curves (XPLOD, VOCAL, EDGE,

CRUISE, SPACE, GRAVITY, CUSTOM or

OFF).

1 During reception/playback, press the

select button.

2 Rotate the control dial until “EQ3

PRESET” appears, then press it.

3 Rotate the control dial until the desired

equalizer curve appears, then press it.

4 Press (BACK).

To cancel the equalizer curve, select “OFF”

in step 3.

Tip

The equalizer curve setting can be memorized for

each source.

Customizing the equalizer

curve — EQ3

“CUSTOM” of EQ3 allows you to make

your own equalizer settings.

1 Select a source, then press the select

button.

2 Rotate the control dial until “EQ3

LOW,” “EQ3 MID” or “EQ3 HIGH”

appears, then press it.

3 Rotate the control dial to adjust the

volume level, then press it.

The volume level is adjustable in 1 dB

steps, from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the

equalizer curve.

To restore the factory-set equalizer

curve, press and hold the select button

before the setting is complete.

4 Press (BACK).

Adjusting setup items

1 Press and hold the select button.

The setup display appears.

2 Rotate the control dial until the desired

item appears, then press it.

3 Rotate the control dial to select the

setting, then press it.*

The setting is complete.

4 Press (BACK).

* For CLOCK-ADJ and BTM settings, step 4 is

not necessary. And for BT SIGNL and

PAIRING settings, step 3 and 4 are not

necessary.

The following items can be set depending

on the source and setting:

AUX VOL (AUX Volume level)*

3

Adjusts the volume level for each

connected auxiliary equipment: “+18

dB” – “0 dB” – “–8 dB.”

This setting negates the need to adjust

the volume level between sources.

BTA VOL (Bluetooth Audio Volume

Level)*

4

(page 19)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 175 176

Comments to this Manuals

No comments