Sony CMT-L1 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
GB
Replacing the battery in
the remote
1 Slide out and remove the battery case.
2 Insert a new lithium battery CR2025
with the + side facing up.
3 Slide the battery case back in.
Tip
When the battery no longer operates the remote,
replace the battery with a new one.
Note
If you are not going to use the remote for a long time,
remove the battery to avoid damage caused by
corrosion from battery leakage.
Notes on lithium battery
Keep the lithium battery out of the reach of
children.
Should the battery be swallowed, immediately
consult a doctor.
Wipe the battery with a dry cloth to assure a good
contact.
Be sure to observe the correct polarity when
installing the battery.
Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
WARNING
Battery may explode if you mistreated.
Do not recharge, disassemble or dispose of in fire.
Setting the clock
1 Turn on the system.
2 Press CLOCK/TIMER SET on the
remote.
3 Press . or > on the remote
repeatedly to set the day, and then
press ENTER/YES or CURSORt on
the remote.
The hour indication flashes.
4 Press . or > on the remote
repeatedly to set the hour, and then
press ENTER/YES or CURSORt on
the remote.
The minute indication flashes.
5 Press . or > on the remote
repeatedly to set the minute, and then
press ENTER/YES on the remote.
If you make a mistake
Press TCURSOR or CURSORt on the
remote repeatedly until the indication you want
to change (day, hour, minute) flashes, and then
change the setting.
To adjust the clock
1Press CLOCK/TIMER SET on the remote.
2Press . or > on the remote repeatedly
until “CLOCK SET?” appears in the display,
and then press ENTER/YES on the remote.
3Do the same procedures as steps 3 to 5
above.
a lithium battery CR2025
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 83 84

Comments to this Manuals

No comments