Sony HT-SF200 User Manual download pdf (Page 31)

31

GB

subwoofer may be difficult to hear.

Play the built-in demonstration music

by following the steps below and

check that the sound is output from

the subwoofer.

 Press and hold on the Bar

Speaker for 5 seconds.

The built-in demonstration music

is played.

 Press again.

The built-in demonstration music

is canceled and the system

returns to the previous status.

 Set the night mode to off. For details,

see “Enjoying Clear Sound with Low

Volume at Midnight (NIGHT)”

(page 21).

 The subwoofer is on the bottom of

the Bar Speaker. Make sure not to hit

obstacles on the subwoofer.

The USB device is not recognized.

 Try the following:

 Turn the system off.

 Remove and reconnect the USB

device.

 Turn the system on.

 Make sure that the USB device is

securely connected to the (USB)

port (page 19).

 Check to see if the USB device or a

cable is damaged.

 Make sure that the USB device is on.

 If the USB device is connected via a

USB hub, disconnect it and connect

the USB device directly to the system.

BLUETOOTH connection cannot be

completed.

 Make sure that the BLUETOOTH

indicator on the Bar Speaker is lit

(page 7).

 Make sure the BLUETOOTH device to

be connected is turned on and the

BLUETOOTH function is enabled.

 Bring the BLUETOOTH device close to

the system.

 Pair this system and the BLUETOOTH

device again. You may need to cancel

the pairing with this system using

your BLUETOOTH device first.

 If the BLUETOOTH function is set to

off, set it to on (page 25).

Pairing cannot be achieved.

 Bring the BLUETOOTH device close to

the system.

 Make sure this system is not receiving

interference from a wireless LAN

device, other 2.4 GHz wireless

devices, or a microwave oven. If a

device that generates

electromagnetic radiation is nearby,

move the device away from this

system.

 Pairing may not be possible if other

BLUETOOTH devices are present

around the system. In this case, turn

off the other BLUETOOTH devices.

Sound of the connected

BLUETOOTH mobile device is not

output from the system.

 Make sure that the BLUETOOTH

indicator on the Bar Speaker is lit

(page 7).

 Bring the BLUETOOTH device close to

the system.

 If a device that generates

electromagnetic radiation, such as a

wireless LAN device, other

BLUETOOTH devices, or a microwave

oven is nearby, move the device away

from this system.

 Move the USB 3.0 device and its cable

away from this system.

 Remove any obstacle between this

system and the BLUETOOTH device or

move this system away from the

obstacle.

USB Device Connection

Mobile Device Connection

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Comments to this Manuals

No comments