Sony STR-DN1040 User Manual download pdf (Page 90)

90

GB

Depending on the position of the subwoofer, the

measurement results may vary. However, there

will be no problems even if you continue to use

the receiver with that value.

x Auto Phase Matching (A.P.M.)

Lets you set the A.P.M. function in the

DCAC function (page 36).

It calibrates the phase characteristics of the

speakers and ensures a well-coordinated

surround space.

• Auto: Switches the A.P.M. function on or

off automatically.

• Off: Does not activate the A.P.M.

function.

• This function does not work in the following

cases.

– “2ch Analog Direct” is being used.

– Headphones are connected.

– Auto Calibration has not been performed.

• The receiver may play back signals at a lower

sampling frequency than the actual sampling

frequency of the input signals, depending on the

audio format.

x Auto Calibration Type

Lets you select the calibration type after

you have performed the Auto Calibration

and saved the settings.

• Full Flat: Makes the measurement of

frequency from each speaker flat.

• Engineer: Sets to “the Sony listening

room standard” frequency characteristics.

• Front Reference: Adjusts the

characteristics of all the speakers to

match the characteristics of the front

speaker.

• Off: Sets the Auto Calibration equalizer

level to off.

x Speaker Connection

Lets you select the speaker pattern and set

the assignment for the SPEAKERS

SURROUND BACK/BI-AMP/FRONT

HIGH/FRONT B terminals.

1 Select the speaker pattern you want,

then press .

2 Set the assignment for the

SPEAKERS SURROUND BACK/

BI-AMP/FRONT HIGH/FRONT B

terminals.

• Bi-Amplifier Connection

• Front B Speakers

• Not Assigned

You can only set the assignment for the

SPEAKERS SURROUND BACK/BI-AMP/

FRONT HIGH/FRONT B terminals if the

speaker pattern is set to a setting without surround

back and front high speakers.

x Level/Distance/Size

You can adjust the level, distance, and size

of the selected speaker.

To adjust the speaker level

You can adjust each speaker’s level (front

left/right, front high left/right, center,

surround left/right, surround back left/

right, subwoofer).

1 Select the speaker on the screen for

which you want to adjust the level,

then press .

2 Select “Level”, then press V/v to

adjust the level.

You can adjust the level from –10.0 dB

to +10.0 dB in 0.5 dB intervals.

When one of the sound fields for music is

selected, no sound is output from the subwoofer if

all the speakers are set to “Large” in the Speaker

Settings menu. However, the sound will be output

from the subwoofer if

– the digital input signal contains LFE signals.

– the front or surround speakers are set to

“Small”.

– “Multi Stereo”, “PLII Movie”, “PLII Music”,

“PLIIx Movie”, “PLIIx Music”, “PLIIz

Movie”, “PLIIz Music”, “HD-D.C.S.” or

“Portable Audio” is selected.

Tip

Notes

Note

Note

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 127 128

Comments to this Manuals

No comments