Sony HT-DDWG800 Operations Instructions download pdf (Page 63)

63

GB

Other Operations

Switching between

digital and analog audio

(INPUT MODE)

When you connect components to both digital

and analog audio input jacks on the receiver,

you can fix the audio input mode to either of

them, or switch from one to the other,

depending on the type of material you intend

to watch.

1 Turn INPUT SELECTOR on the

receiver to select the input.

You can also use the input buttons on the

remote.

2 Press INPUT MODE repeatedly

on the receiver to select the

audio input mode.

The selected audio input mode appears on

the display.

Audio input modes

x AUTO

Gives priority to digital audio signals when

there are both digital and analog connections.

If there are more than one digital connection,

HDMI audio signals have priority over

COAXIAL and OPTICAL audio signals.

If there are no digital audio signals, analog

audio signals are selected.

x ANALOG

Specifies the analog audio signals input to the

AUDIO IN (L/R) jacks.

Note

Some audio input modes may not be set up

depending on the input.

Listening to digital sound

from other inputs

(DIGITAL ASSIGN)

You can reassign digital audio input that has

OPTICAL or COAXIAL (DVD IN, SAT IN)

signals to another input when they are not

currently being used.

For example, to output the sound source for

DVD player using the OPTICAL IN jack on

the receiver, then:

• Connect the optical output jack of the DVD

player to the OPTICAL SAT IN jack of the

receiver.

• Assign “SAT OPT” to “DVD” in the

DIGITAL ASSIGN setting.

1 Press AMP MENU.

“1-LEVEL” appears on the display.

2 Press V/v repeatedly to select

“5-AUDIO”.

3 Press or b to enter the

menu.

4 Press V/v repeatedly to select

“D. ASSIGN”.

5 Press or b to enter the

parameter.

6 Press V/v repeatedly to select a

vacant digital audio input (for

example, “SAT OPT”).

7 Press or b to enter your

selection.

Other Operations

continued

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 79 80

Comments to this Manuals

No comments