Sony SNC-CS50N User Manual download pdf (Page 41)

Administrating the Camera

Setting the Security — Security Menu

Setting the Security

— Security Menu

When you click Security in the Administrator menu, the

Security menu appears.

Use this menu to limit the computers that can access the

camera.

Security function

To activate the security function, select On.

Default policy

Select the basic policy of the limit from Allow and Deny

for the computers specified in the Network address/

Subnet 1 to Network address/Subnet 10 menus below.

Network address/Subnet 1 to Network

address/Subnet 10

Type the network addresses and subnet mask values that

you want to allow or deny access to the camera.

You can specify up to 10 network addresses and subnet

mask values. For a subnet mask, type 8 to 32.

Select Allow or Deny from the drop-down list on the

right for each network address/subnet mask .

Tip

The subnet mask value represents the bit number from

the left of the network address.

For example, the subnet mask value for “255.255.255.0”

is 24.

If you set 192.168.0.0/24 and Allow, you can allow

access from computers having an IP address between

“192.168.0.0” and “192.168.0.255”.

Note

You can access the camera even from a computer having

an IP address whose access right is set to Deny, if you

enter the user name and password set for the

Administrator boxes in the User menu.

OK/Cancel

See “Buttons common to every menu” on page 26.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 86 87

No comments

Sony SNC-CS50N User Manual Page 41