Sony SNC-CS50N User Manual Page 24
- Page / 87
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Operating the Camera
Switching TCP/UDP Transmission Mode
24
Switching TCP/UDP
Transmission Mode
You can select TCP or UDP as the communication port
for the video/audio data.
This function can be used when Mode (video codec
mode) (page 33) is set to MPEG4 and the ActiveX
viewer is used.
Notes
• The function may not operate correctly when you use
personal firewall software or antivirus software on
your computer. In that case, disable the software or
select the TCP mode.
• If you are using Windows XP Service Pack 2, disable
“Windows Firewall” (see page 9).
1
Open the main viewer.
2
Click TCP/UDP Transmission.
The Select TCP/UDP dialog appears.
3
Click one of the buttons TCP, UDP (Unicast) or
UDP (Multicast).
TCP: This is normally selected.
When TCP is selected as the communication port,
HTTP communication is adopted for video/audio
communications.
HTTP is the protocol used for reading the usual
Web page.
In an environment capable of reading Web pages,
you can watch or listen to the video/audio by
selecting the TCP port.
UDP (Unicast): When UDP (Unicast) is selected
as the communication port, RTP (Real-time
Transport Protocol) is adopted for video/audio
communications. Since RTP is the protocol for
running video/audio data, the video/audio playback
is smoother than when TCP (HTTP) is selected. If
a firewall is installed between the camera and the
computer, or depending on the network
environment, the video/audio may not play back
properly when UDP (Unicast) is selected. In that
case, select TCP.
UDP (Multicast): This protocol is selectable when
Multicast streaming (page 35) is On. When UDP
(Multicast) is selected as the transmission port,
RTP (Real-time Transport Protocol) and UDP
multicast techniques are adopted for video/audio
transmission. By selecting it, the network
transmission load of the camera can be reduced. If
a router that does not correspond to the multicast or
a firewall is installed between the camera and the
computer, the video/audio may not play back
properly. In that case, select TCP or UDP
(Unicast).
4
Click OK to close the dialog.
If you do not change the transmission setting, click
Cancel.
- Network Camera 1
- Owner's Record 2
- ATTENTION 3
- NOTICE TO USERS 3
- Table of Contents 4
- Features 6
- How to Use This User’s 6
- Precautions 7
- System Requirements 8
- Preparation 10
- Accessing the Camera 11
- Using the Web Browser 11
- Basic Configuration by 13
- Administrator and User 14
- Logging in to Homepage 15
- About viewers 16
- Configuration of Main 17
- Main menu 18
- Camera control section 18
- Controlling the Monitor 19
- Capturing a Monitor 20
- Sending an Image File 21
- Recording a Still Image 22
- Controlling Alarm 22
- Output 1, 2 22
- Controlling Day/Night 23
- Function 23
- Playing the Audio File 23
- Stored in the Camera 23
- Switching TCP/UDP 24
- Transmission Mode 24
- Basic Operations of 25
- Administrator Menu 25
- Buttons common to every menu 26
- General note on menus 26
- Configuring the System 27
- Date & time Tab 28
- Initialize Tab 29
- Setting the Camera 30
- Image and Audio 30
- Picture Tab 31
- Day/Night Tab 32
- Video codec Tab 33
- OK/Cancel 34
- Streaming Tab 35
- Configuring the Network 36
- — Setting of wireless 37
- Administrating the Camera 38
- Setting the User 40
- Setting the Security 41
- Sending an Image via E 42
- Sending Images to FTP 45
- Recording Images in 47
- Image memory function when 48
- Directory structure of image 50
- Downloading Images 51
- Setting the Alarm Output 51
- Outputting Audio Linked 52
- Setting the Operations 53
- FTP client 54
- Image memory 54
- Alarm output 1, 2 54
- Day/Night 54
- Setting the Schedule 55
- Setting the Alarm Buffer 56
- Setting the Object 57
- Detection Function 57
- Object detection Menu 57
- Common Tab 58
- Object size 59
- Unattended object setting Tab 61
- Transmitting with 62
- External Equipment 62
- Using the External Serial 62
- Terminal 62
- Character length 63
- Stop bit 63
- Using the Supplied 64
- Setup Program 64
- Date time Tab 65
- Rebooting the Camera 65
- Using the SNC audio 66
- Audio upload tab 67
- Voice alert tab 67
- Using the SNC video 69
- Using the SNC video player 70
- Using the Custom 71
- Homepage Installer 71
- Assigning the IP 73
- Address to the Camera 73
- Using ARP Commands 73
- Using the SNMP 73
- 2. Setting Commands 74
- TM) CCD 75
- Specifications 76
- Pin assignment of I/O port 77
- Connecting to a 78
- Computer or a Network 78
- Attaching a CS-mount 79
- Typical CCD Phenomena 80
- About a “Memory Stick” 80
- When You Discard the 81
- Glossary 81
- Sony Corporation 87
Related products and manuals for Video surveillance systems Sony SNC-CS50N
(75 pages)© 2020, manymanuals.com. All rights reserved. | 0.432 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals