Sony PSP-1010 User Manual download pdf (Page 158)

158

Precautions

Moisture condensation

If the PSP® system or UMD® is brought directly from a cold location to a warm

one, moisture may condense on the lens inside the system or on the UMD

®.

Should this occur, the system may not operate properly. In this case, remove the

UMD

® and turn off and unplug the system. Do not put the UMD® back in until

the moisture evaporates (this may take several hours). If the system still does

not operate properly, contact our technical support line for assistance:

From and within the Mexico City area: 5002 9819

Within the Mexican Republic: 01 800 759 SONY or 01 800 759 7669.

UMD® handling

• Do not touch the opening on the rear of the disc (recorded surface of the disc)

with your fingers.

• Do not allow dust, sand, foreign objects or other types of dirt to get on the

disc.

• If the UMD

® becomes dirty, gently wipe the exterior and recorded surfaces

of the UMD

® using a soft cloth. Do not use solvents or other chemicals.

Cleaning

For safety reasons, unplug the AC power cord from the electrical outlet and

remove the battery pack from the system before cleaning.

x Cleaning the exterior surface

Wipe gently with a soft cloth. Do not use solvents or other chemicals to clean

the exterior of the PSP

® system.

x Cleaning the LCD screen

Wipe gently with a soft cloth.

x Cleaning the connectors

• Do not use when the connectors of the system, AC adaptor or the AC power

cord are not clean. Remove the dirt with a dry cloth or cotton swab. If used

when dirty, the flow of electrical current may be obstructed.

• If the headphones or remote control connectors become dirty, this could cause

noise or interruptions in sound. Wipe the connectors with a dry, soft cloth to

keep in clean condition.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 283 284

No comments

Sony PSP-1010 User Manual Page 158