38
GB
Input method/Number of the characters
for security key
4Enter a pre-shared key when you select
[WPA(TKIP)], [WPA(AES)], [WPA2(TKIP)],
or [WPA2(AES)] in 2.
Enter the pre-shared key for your wireless LAN
router.
The length of the key should be 8 to 64 characters.
If you input 64 characters, enter hexadecimal
numbers (0 to 9, A to F, a to f).
Input method/Number of the characters
for pre-shared key
5Cancel the settings.
6Click the button to confirm the set values.
If any of the set values is incorrect, a window
appears.
Click [Setup] to show the set values. Correct them if
necessary.
Notes
• Use a security key or a pre-shared key that cannot be
easily guessed.
• Periodically change the security key and the pre-
shared key to ensure the network security.
Firmware update window
Update the firmware for the unit.
1The version of the current firmware is
displayed.
2Select the firmware file you want to update.
Click [Browse] to show the window for selecting
the firmware.
3Click the button to update.
If you select the right firmware, updating starts.
Click [Restart] when the update is completed.
If you select an incorrect firmware, click [Retry]
and select the correct one.
Notes
• Do not restart, pull out the cable, or turn off the
power of the connected AV system while updating
the firmware.
• Check the following website for the unit firmware
updates;
USA:
http://esupport.sony.com/?ref=http%3A//
www.sony.com/index.php
Canada:
http://www.sony.ca/sonyca/view/english/warranty/
consumer_support.shtml
Europe:
http://support.sony-europe.com/main/main.asp?l=en
WEP 64bits WEP 128bits
Characters 5 (one-byte
alphanumerics
and/or symbols)
13 (one-byte
alphanumerics
and/or symbols)
Hexadecimal
numbers
10 (0 to 9, A to
F, a to f)
26 (0 to 9, A to
F, a to f)
Characters 8 to 63 (one-byte alphanumerics
and symbols)
Hexadecimal
numbers
64 (0 to 9, A to F, a to f)
1
3
2
Comments to this Manuals